Abstract:A novel in situ process was developed to produce titanium matrix composites reinforced with TiB and TiC of different mole ratios in which traditional ingot metallurgy plus self-propagation high-temperature synthesis (SHS) reactions between Ti and B4C, graphite powder were used. Microstructures of (TiB + TiC)/Ti in situ composites were comprehensively characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). Solidification paths were investigated using a differential scanning calorimeter (DSC). Results show that there is an apparent difference in morphologies of reinforcements. The reinforcements nucleate and grow from the melt in a way of dissolution precipitation. The different morphologies are related to their solidification paths and the particular crystal structure of the reinforcement. TiB grows along the [010] direction and forms short-fiber shape due to its B27 structure, whereas TiC with NaCl type structure grows in a dendritic, equiaxed, or near-equiaxed shape. The DSC results and analysis of the phase diagram yield three stages for the solidification paths of in situ synthesized titanium matrix composites: (1) primary phase, (2) monovariant binary eutectic, and (3) invariant ternary eutectic. The addition of graphite adjusts the solidification paths and forms more dendritic primary TiC. The addition of aluminum does not change the solidification paths. However, the reinforcements grow finer and lead to equiaxed or near-equiaxed TiC morphologies. The following consistent crystallographic relationships between TiB and titanium were observed by HRTEM, i.e., [010](TiB)//[01 (1) over bar0](Ti), (100)(TiB)//((2) over bar 110)(Ti), (001)(TiB)//(0002)(Ti), (10 (1) over bar)(TiB)//(4 (22) over bar1)(Ti) and [001](TiB)//[01 (1) over bar0](Ti,) (0 (1) over bar0)(TiB)//((2) over bar 110)(Ti), (200)(TiB)//(0002)(Ti). The formation of the preceding crystallographic relationships is related to the growth mechanism of TiB. It also helps to minimize the lattice strain at the interfaces between TiB and the titanium matrix.

Microstructure evolution during preparation of in-situ TiB reinforced titanium matrix composites

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

Microstructure and tensile properties of in situ synthesized (TiBw + TiCp)/Ti6242 composites

Microstructure and compressive properties of in situ synthesized (TiB + TiC)/Ti composites

Preparation, Microstructures and Mechanical Properties of In-Situ TiB2/Al Composites by Mechanical Stirring and Subsequent Ultrasonic Treatment

Evolution of microstructure and tensile properties of in situ titanium matrix composites with volume fraction of (TiB+TiC) reinforcements

Solidification Paths and Reinforcement Morphologies in Melt-Processed (tib + TiC)/Ti in Situ Composites

Microstructure and Mechanical Properties Variation of Tib/Ti Matrix Composite by Thermo-Mechanical Processing in Beta Phase Field

Microstructure And Compressive Properties Of In Situ Synthesized (Tib Plus Tic)/Ti Composites

Microstructures and mechanical properties of in-situ TiB2/Al-Si-Mg composites

Microstructure evolution, deformation behavior and manufacture design of TiAl matrix composites reinforced with in-situ borides precipitation

Microstructural characteristics and mechanical properties of in situ synthesized (TiB+TiC)/TC18 composites

Microstructure and Tensile Properties of in Situ Synthesized (Tib+tic)/ti-6Al-4v Composites

Microstructure and Mechanical Properties of In-situ Synthesized(TiB+TiC)/Ti-8Al-1Mo-1V Composites

Microstructure of In-Situ Synthesized (tib+tic)/ti Composites Prepared by Hot-pressing

Modification of Microstructure and Tensile Property of TiBw/near-α Ti Composites by Tailoring TiBw Distribution and Heat Treatment

In Situ Preparation Of Titanium Matrix Composites Reinforced With Tib Whiskers Andy(2)O(3) Particles

Microstructural Characterization of Tib in in Situ Synthesized Titanium Matrix Composites Prepared by Common Casting Technique

Microstructural characterization and mechanical properties of (TiC+TiB)/TA15 composites prepared by an in-situ synthesis method

Microstructure and Mechanical Properties of In-situ TiB2/6351 Composite

Microstructure and hardness of as-cast in situ TiB short fibre reinforced Ti-6Al matrix composites