Abstract:Gasoline homogeneous charge compression ignition (HCCI) can achieve high efficiency and extremely low NOX emissions. However, the working condition range of HCCI is limited by knock occurring during engine operation. To achieve an expanded HCCI working condition range, it is necessary to explore a method predicting knock cases accurately to avoid knock occurring. Based on a DI-HCCI engine with ethanol/gasoline mixed fuel, the knock cases under different conditions have been investigated. In-cylinder pressure signals are used to identify the knock cases and the knock oscillations are extracted with fast Fourier transform (FFT). The effects of the ethanol proportion in the fuel and air/fuel ratio on the characteristics of knock have been studied. The results have shown that the knock parameters, such as maximum frequency, start point angle and the duration, have close relationship with the knock intensity. Stronger knock causes higher maximum frequency, earlier start point and longer duration, but will lead to faster attenuations of knock oscillation. Furthermore, air/fuel ratios and the ethanol fraction have effects on the knock intensity. As air/fuel ratio decreases, the knock intensity, frequency and knock probability will be strengthened. When the fraction of ethanol increases, the knock amplitude, frequency and tendency will be impaired due to the high octane number of ethanol, which can also make the knock boundary expand effectively. From the analysis results of combustion phasing CA10 and CA50, it shows that ethanol has significant effect on retarding combustion, which leads to impaired knock. This retarding effect of ethanol is more sensitive with lower intake temperature. In addition, a 0-dimension combustion predicting model was set up in this paper. With the relationships found among knock and combustion parameters, such as air/fuel ratio, ethanol fraction and intake air temperature, the combustion pressure and knock characteristics could be predicted with an error below 10%.

Knock Prediction for Dual Fuel Engines by Using a Simplified Combustion Model.

Implementation and Parameter Analysis of the Knock Phenomenon of a Marine Dual-Fuel Engine Based on a Two-Zone Combustion Model

Numerical analysis on knock for a high compression ratio spark-ignition methanol engine

A Predictive Model for Knock Onset in Spark-Ignition Engines with Cooled EGR

A Knock Onset Predicting Model for Low Pressure Cooled EGR Boosted Gasoline Engines

A Two-Zone Combustion Model for Knocking Prediction of Marine Natural Gas SI Engines

Experimental Study on the Characteristics of Knock under DI-HCCI Combustion Mode with Ethanol/Gasoline Mixed Fuel

Numerical Investigation on Knock Combustion in a Diesel–Dimethyl Ether Dual-Fuel Engine

Study of Knock in A High Compression Ratio Spark-Ignition Methanol Engine by Multi-Dimensional Simulation

The Knock Study of Methanol Fuel Based on Multi-Dimensional Simulation Analysis

Progress in knock combustion modeling of spark ignition engines

A Generalized Kinetic Model with Variable Octane Number for Engine Knock Prediction

Parametric Knocking Performance Investigation of Spark Ignition Natural Gas Engines and Dual Fuel Engines

Development and Verification of Simplified Methane/dimethyl Ether Mechanism for Micro-Combustion

Development of a New Reduced Diesel/natural Gas Mechanism for Dual-Fuel Engine Combustion and Emission Prediction

The knock study of high compression ratio SI engine fueled with methanol in combination with different EGR rates

Numerical comparative study on knocking combustion of high compression ratio spark ignition engine fueled with methanol, ethanol and methane based on detailed chemical kinetics

Optimizing Engine Concepts by Using a Simple Model for Knock Prediction

Identification, Prediction and Classification of Hydrogen-Fueled Wankel Rotary Engine Knock by Data-Driven Based on Combustion Parameters

Numerical Analysis of Knock Combustion with Methanol-Isooctane Blends in Downsized SI Engine

New development in the combustion model of compression ignition dual fuel engine