Abstract:Methanol is an extremely attractive fuel for spark ignition (SI) engines. In this paper, a novel high-pressure port fuel injection (PFI) heavy-duty SI engine fueled by pure methanol was developed. The high-pressure PFI system aims to promote atomization, evaporation and mixing with the air of the methanol spray. The knock tendency enhanced by the large flame propagation distance in heavy-duty engines is the main barrier to improving thermal efficiency. To further suppress knock and improve thermal efficiency, the knock tendency and its mitigation method were studied experimentally and numerically.Experimental tests were firstly carried out to investigate the knock behaviors. The effects of the injection pressure(pinj) and injection timing(αinj) on the knock tendency, and the cylinder-to-cylinder variation of knock were studied under the condition of 1500rpm and medium load. The stoichiometric combustion mode was adopted and the spark timing was fixed at 24°CA BTDC, pinj varied from 8 MPa to 24 MPa by a step of 4 MPa and α inj was from 320°CA to 480°CA at an interval of 40°CA, respectively. The knock tendency first decreases and then increases with the retard of αinj. The knock tendency at α inj of 480°CA is higher than that at other αinj. There is a significant cylinder-to-cylinder variation of the knock tendency. The knock tendency of the cylinder with the less fresh air charge is lower due to the dominant role of the low in-cylinder temperature and pressure rather than the richer mixture within the scope of this study. Thereafter, numerical simulation was conducted to understand the mechanism of the knocking. The mixture thermodynamic states and the flame propagation process were investigated particularly. The strong interaction between spray and the intake flow can efficiently cool the mixture and form a more homogeneous mixture. The mixture with lower temperature and better homogeneity has conducive effects on knock suppression due to the longer ignition delay of the end-gas and the faster flame propagation process. Both the experiment and simulation prove that high-pressure injection during the intake stroke is the optimal injection strategy for knock mitigation.

An experimental study of knock analysis of HCNG fueled SI engine by different methods and prediction of knock intensity by particle swarm optimization-support vector machine

Comparative Knock Analysis of HCNG Fueled Spark Ignition Engine Using Different Heat Transfer Models and Prediction of Knock Intensity by Artificial Neural Network Fitting Tool

Investigation of Impacts of Hydrogen Injection and Spark Strategy on Knock in Hydrogen Engine

Experimental Study on the Characteristics of Knock under DI-HCCI Combustion Mode with Ethanol/Gasoline Mixed Fuel

Effects of Chamber Geometry, Hydrogen Ratio and EGR Ratio on the Combustion Process and Knocking Characters of a HCNG Engine at the Stoichiometric Condition

Inducing Factors and Frequency of Combustion Knock in Hydrogen Internal Combustion Engines

Experimental study of hydrogen enriched compressed natural gas (HCNG) engine and application of support vector machine (SVM) on prediction of engine performance at specific condition

Numerical modeling of knocking combustion in spark ignition engines

Knock Prediction for Dual Fuel Engines by Using a Simplified Combustion Model.

Numerical investigation on combustion regulation for a stoichiometric heavy-duty natural gas engine with hydrogen addition considering knock limitation

An Experimental and Numerical Study of a Hydrogen Fueled, Directly Injected, Heavy Duty Engine at Knock-Limited Conditions

Experimental Study of Spatial Distribution of Knock Events in a Turbocharged Spark-Ignition Engine

Simulation and prediction on the performance of a vehicle's hydrogen engine

Implementation and Parameter Analysis of the Knock Phenomenon of a Marine Dual-Fuel Engine Based on a Two-Zone Combustion Model

A Knock Onset Predicting Model for Low Pressure Cooled EGR Boosted Gasoline Engines

A Predictive Model for Knock Onset in Spark-Ignition Engines with Cooled EGR

Experimental and Numerical Investigation on Knock for a Heavy-Duty Spark Ignition Methanol Engine

Experimental Investigation on Knock Characteristics from Pre-chamber Gas Engine Fueled by Hydrogen

Performance, emissions and combustion analysis of hydrogen-enriched compressed natural gas spark ignition engine by optimized Gaussian process regression and neural network at low speed on different loads

Prediction and Control of Knock at High Load Boundary for HCCI Engine Based on Neural Network

Computational Analysis of Performances for a Hydrogen Enriched Compressed Natural Gas Engine’ by Advanced Machine Learning Algorithms