Abstract:The microelectrostatic comb resonator’s issues with high driving voltage and strong feed-through coupling noise limit its practical use. In earlier studies, the design and structural optimization of microcomb resonators generally focused on lowering beam stiffness and raising electrostatic force density to enhance resonance displacement and lower driving voltage. However, for a microresonator that performs high-speed resonance in the air, it is required to consider the three influencing elements of the electrostatic field, structural mechanics, and fluid mechanics to achieve the best dynamic resonance amplitude. In this paper, the parametric analysis of the comb-driven resonator is carried out. First, the comb-driven electrostatic force and all air-damping terms are investigated using an electrostatic force analytical model considering edge effects, a damping analytical model simplified based on the thin-film damping model, and the finite element model. The analysis results agree with the simulated results. To more accurately quantify the dynamic electrostatic force and damping coefficient, the electrostatic–structure–fluid three-field indirect coupling model was used, and the law of the resonant amplitude of the resonator as a function of the structural parameters was obtained. The results show that, for the electrostatic comb resonator that oscillates at atmospheric pressure, to obtain a high-voltage driving efficiency, a thin polysilicon film can be used to design narrow comb fingers that are dense in the vertical direction and loose in the lateral direction. To validate the accuracy of the model and the results of parameter analysis, an electrostatic comb-drive resonator with shapes optimized from numerical simulations was fabricated. The results show that the driving efficiency is enhanced by 102%, with the chip area increased by 29%, which shows the superiority of parameter optimization.

Computation of Electrostatic Forces with Edge Effects for Non-Parallel Comb-Actuators

Analytical and High Accurate Formula for Electrostatic Force of Comb-Actuators with Ground Substrate

Capacitance Extraction of Three-Dimensional Interconnects Using Element-By-Element Finite Element Method (Ebe-Fem) and Preconditioned Conjugate Gradient (pcg) Technique

Capacitance extraction of high-density 3D interconnects using finite element method

Analysis of Lateral Stability of Electrostatic Comb-drive Structure

Analytical model of electrostatic force generated by edge effect of a Kelvin capacitor based on conformal transformation

Electrostatic Comb-Drive Actuator for Mems Relays/Switches with Double-Tilt Comb Fingers and Tilted Parallelogram Beams

Coupled-field finite element analysis of MEMS compound electrostatic actuator by using the ANSYS software

A New Model of Fringing Capacitance and its Application to the Control of Parallel-Plate Electrostatic Micro Actuators

Out-of-Plane Comb-Drive Lever Actuator

Coupled Simulative Analysis for Drive Characteristic of Micro-Comb Structure

Parametric Analysis of Electrostatic Comb Drive for Resonant Sensors Operating under Atmospheric Pressure

Analyses and Optimization of Electrostatic Film Actuators Considering Electrical Breakdown

Effects of non-parallel combs on reliable operation conditions of capacitive inertial sensor for step and shock signals

Coupled electrostatic-structural analysis for a 3-D micro-comb structure

Contact force estimation of hydraulic soft bending actuators for gripping

Study on Electroelastic Field Concentration Around the Electrode Tip in Multilayer Ferroelectric Actuators of Two Designs and Their Optimizations

Silicon-On-Insulator Out-Of-Plane Electrostatic Actuator with in Situ Capacitive Position Sensing

Dynamics of Electrostatic MEMS Actuators

Electrostatically Actuated Microgripper Based on Silicon Bulk Micromachining