Abstract:It has been generally acknowledged that the configuration of a gas distributor has significant impact on fluid dynamics and mixing in shallow bubble column reactors.This study employs computational fluid dynamics (CFD)-based models to simulate transient gas-liquid flow in a large-scale shallow cylindrical bubble column of 800mm in diameter at the superficial gas velocity of 0.1m/s.An Eulerian-Eulerian two-fluid model along with the stand k-e turbulence model is adopted to simulate flow generated by gas sparged through five different multiple-pipe gas distributors which the four pipes are uniformly mounted at different distribution rings with ring to bubble column diameter ratios of 0.3,0.4,0.5,0.6 and 0.7.Multiple-Size-Group (MUSIG) model is also employed in the simulation to account for bubble break-up and coalescence.The effects of the diameter of distribution rings for allocating gas sparging pipes in the gas distributor on hydrodynamics,gas hold-up,mixing,turbulence and bubble size is systematically investigated.The simulation results clearly show that gas hold-up and mixing characteristics in the bubble column are affected by the ring to bubble column diameter ratio.It is demonstrated that the mixing time and overall gas hold-up increase with the increase of ring to bubble column diameter ratio initially but decrease with further increasing such ratio.It is found from the simulation that the optimum ring to bubble column diameter ratio is about 0.4 for the best gas hold-up distribution and such a ratio of 0.5 corresponds the longest mixing time.The CFD modelling results also reveal that the flow pattern inside the bubble column is dominated by single circulation when ring to bubble column diameter ratio is smaller than 0.5 while double-circulation flow appears when the ratio is larger than 0.5,thus impairing the mixing in the bubble column.A comparison has been presented between the simulation and the experimental data.

Influences of Structure and Operational Parameters on Gas Hold-Up in an External-Loop Reactor

Gas Holdup and Liquid Velocity Distribution in a Jet Loop Reactor

Gas Holdup and Liquid Velocity Distributions in the Up Flow Jet-Loop Reactor

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Hydrodynamic Character of Internal-Loop Airlift Reactor

Structure effect of industrial loop reactors on non-uniform flow characteristics

Gas Holdup and Liquid Circulation Velocity in Gas-Liquid Two Stage Internal Loop Airlift Reactor

Application of CFD Simulation for Optimisation of the Multi-Pipe Gas Distributors in a Large-Scale Shallow Bubble Column

Numerical Simulations Of Fluid Dynamics And Mixing In A Large Shallow Bubble Column: Effects Of The Sparging Pipe Allocations For Multiple-Pipe Gas Distributors

Hydrodynamic Behavior in Three-Phase External Loop Airlift Reactors

EFFECTS OF AERATED LIQUID LEVEL ABOVE DOWNCOMER ON HYDRODYNAMIC CHARACTERISTICS OF AN EXTERNAL-LOOP AIRLIFT REACTOR

Liquid Circulation Velocity and Local Gas Holdup in Air-lift Loop Reactor

Hydrodynamic and mass transfer characteristics of external-loop airlift reactors without an extension tube above the downcomer

Influence of Sparger Type on Mass Transfer in a Pilot-Scale Internal Loop Airlift Reactor

Influence of the Gas Distributor on the Local Hydrodynamic Behavior of an External Loop Airlift Reactor

Axial and Radial Profiles of Hydrodynamic Parameters of External-Loop Airlift Reactor

The Effects of Structure Characteristics of External Airlift Loop Reactor on Mass Transfer Behaviour

Studies on Gas-Liquid Mass Transfer Characteristics of Horizontal Vessel

Effects of Internal Structures on Mass Transfer Performance of Jet Bubbling Reactor

Impact of Operating Conditions on the Performance of the External Loop in a CFB Reactor