Abstract:As the global demand for lower carbon emissions intensifies, the deployment of medium and small-scale liquid hydrogen (LH2) storage tanks in heavy-duty trucking and aviation is expected to increase. However, heat leakage into these cryogenic vessels leads to a continuous increase in tank pressure, potentially resulting in sudden hydrogen release and other safety concerns. While horizontal LH2 tanks demonstrate greater suitability in the transportation sector compared to vertical tanks, investigations in this domain remain scarce. Research on horizontal tanks is crucial for safe and efficient storage. Understanding these dynamics is essential for predicting temperature and pressure changes during self-pressurization, ensuring safe liquid hydrogen storage. This study designed and built a 500-liter horizontal liquid hydrogen tank for vehicle fuel storage, following ISO 13985 standards to ensure practical applicability. The project encompassed material selection, structural design, and both stress and thermodynamic analyses. Preliminary experiments were conducted using liquid nitrogen as a substitute for liquid hydrogen. Experiments assessed tank heat leakage, vapor-cooled shield insulation performance, thermal stratification, lossless storage time, and pressure changes during self-pressurization and steady-state evaporation. Results validate the efficiency of our pressure vessel design method for complex conditions, enhancing understanding of self-pressurization and thermal stratification in horizontal tanks. The vapor-cooled shield reduced heat leakage into the tank by 22.7%, decreasing the daily evaporation rate under liquid nitrogen conditions from 1.87 wt% to 1.5 wt%. and maintaining an initial liquid level of 50% extended the lossless storage time to 50 hours in the LN2 scenario. These findings offer valuable insights for assessing the performance of subsequent liquid hydrogen experiments.

Design of Thermal Insulation for Lng Tanker

Design and Optimization of the Insulation Performance of a 4000 m3 Liquid Hydrogen Spherical Tank

Study on Cold Insulation Construction Technology of LNG Low Temperature Storage Tank Wall

Design of the Thickness of Hot Corner Protection of LNG Storage Tank

Insulation calculation for LNG spherical tank

Design and Analysis of the Thermal Insulation System for a New Independent Type B LNG Carrier

Design of LNG vehicle used insulation cylinder BOG adsorption recovery system

Finite element analysis of strength of mobile cryogenic LNG storage tank

Comparative FEM Analysis of Vacuum and Perlite Insulation Techniques on the Structural Integrity of Independent Type C Liquefied Natural Gas Tank

Perspective for the Safe and High-Efficiency Storage of Liquid Hydrogen: Thermal Behaviors and Insulation

Design and Application of Vacuum Test Bench for LNG Cryogenic Pipeline

The Design Development of the Low-Temperature NormalP ressure and Large LPG Storage Tank

Numerical Simulation and Experiment Verification of the Static Boil-off Rate and Temperature Field for a New Independent Type B Liquefied Natural Gas Ship Mock Up Tank

Research on Temperature Field and Thermal Stress of Liquefied Natural Gas Carrier with Incomplete Insulation

Thermodynamic analysis and comparison of four insulation schemes for liquid hydrogen storage tank

Comparative study of three insulation materials installed on type C independent tank for offshore LNG transportation

Construction of Cold Insulation for LNG Project

Comprehensive Design and Preliminary Experiments of Liquid Hydrogen Storage Tank for Trucks

Modeling, Simulation and Analysis of Tank Thermodynamic Behaviors During No-Vent LNG Bunkering Operations

Experimental study on liquid/solid phase change for cold energy storage of Liquefied Natural Gas (LNG) refrigerated vehicle

Study On Structure Lightweight Of The Vehicle Mounted Lng Tank