Abstract:Multilevel inverters typically require a large number of power switches, increasing the likelihood of faults and compromising system reliability. To enhance inverter reliability, this article introduces a five-level multilevel inverter with fault-tolerant capabilities. This topology employs two DC voltage sources with four unidirectional and two bidirectional power IGBT switches. A fault-tolerant control strategy has been developed to reconfigure the topology whenever an open circuit fault occurs in a switch. To evaluate the proposed topology, a loss analysis and efficiency assessment were conducted using Piecewise Linear Electrical Circuit Simulation. The results showed 36.35 W of power loss and an efficiency of 96.49% for 1 kW of output power. The total standing voltage per unit and cost function of the proposed topology are 6 and 4.2, respectively, which are minimal compared to other fault-tolerant topologies. Furthermore, a laboratory prototype was developed using a DSPACE-1202 controller to validate the results. The voltage stress on the power devices was found to be reduced by 25–50% under various post-fault conditions compared to healthy condition. The proposed topology is able to withstand OC fault in single unidirectional switch or multiple unidirectional switches and still be able to generate 64% of the rated output rms voltage. If an OC fault occurs in any of the bidirectional switches, then the topology is fully tolerant by generating 100% of the rated output rms voltage. The reliability for the proposed topology is performed using Markov chain rule and proved that the proposed topology is superior to other topologies.

A MULTILEVEL CONVERTER TOPOLOGY WITH REDUNDANCY ABILITY

A MULTILEVEL CONVERTER TOPOLOGY WITH SELF-REPAIR ABILITY

A Multilevel Converter Topology with Fault-Tolerant Ability

A Comparative Analysis of the Three-Level Npc and Anpc Converter Loss Distribution

A fault-tolerant T-type three-level inverter system

Cascaded Half-Bridge Multilevel Inverter with Reduced Number of Power Switches

Reliability Analysis of Power Components in Restructured DC/DC Converters

Capacitor Voltage Balancing Algorithm with Redundant Level Modulation for a Five Level Converter with Reduced Device Count

Multilevel Converter Topologies and Two Novel Topologies

A Single-Phase Multilevel Inverter Topology with Fault Tolerant Capability for Single and Multiple Switch Failures

A Redundant Unit to Form T-Type Three-Level Inverters Tolerant of IGBT Open-Circuit Faults in Multiple Legs

Research on Combined Multilevel Converter Topologies

AN IMPROVED CASCADED MULTILEVEL INVERTER TOPOLOGY

An Improved Hybrid Multilevel Converter For Renewable Energy Generation

Multilevel Converter Topologies Based on Series-Parallel and Parallel-Series Connections of Basic Cells

A Topology-Reconfigurable Fault-Tolerant Two-and-Single Stage AC–DC Converter for High Reliability Applications

Redundancy Fault-tolerated Control Strategy for Sub-module Faults of Modular Multilevel Converters

A HYBRID CLAMPED MULTILEVEL INVERTER WITH NEUTRAL POINT VOLTAGE BALANCING ABILITY

Reliability Evaluation of Three-Level Inverters

Reliability Equivalence to Symmetrical UHVDC Transmission Systems Considering Redundant Structure Configuration

Energy-balancing Control Strategy for Modular Multilevel Converters under Submodule Fault Conditions