Abstract:Nanoparticles of 3:2 mullite (3Al2O3·2SiO2)+5 wt.% zirconia, boehmite (γ-AlOOH) and pure ZrO2 suitable for applications in the field of monolithic/fibre reinforced ceramic composites, nanoceramics and ceramic fibre coating, respectively, have been produced by hydrothermal synthesis (HS) at moderately low temperatures. The effect of the process parameters or starting precursor materials properties on the particle size, shape and structure have been examined by particle size measurements, TEM and scanning electron microscopy. The mullite powders synthesised tend to be highly irregular in morphology with a wide particle size distribution from 55 nm to 7.1 μm, whereas the boehmite (γ-AlOOH) particle morphology and size are determined by the pH value of the initial hydrothermal solution. As the pH changes from low (acid) to high (alkaline), the boehmite morphology changes from a “needle-like” one to a “platelet” one. At a pH value of 10, the boehmite particles exhibit platelet morphologies, with a maximum face dimension of about 40 nm and a thickness of approximately 5 nm. The synthesised boehmite particles were successfully used to produce monolithic alumina components at lower sintering temperatures with sub-micrometer grain sizes. Near-spherical shape monoclinic zirconia particles with dimensions in the range of 20–60 nm were also produced by HS. The successful application of the synthesised powders in the field of mesoporous fibre-reinforced ceramic composites, high-density monolithic ceramics and ceramic fibre coatings (formation of weak inter-phase between fibre and matrix) are also presented.

Synthesis of Mesoporous Zirconia with Hydrothermal Homogeneous Precipitation Method

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Sol–gel Synthesis of Mesoporous Spherical Zirconia

Preparation and Characterization of Mesoporous Zirconia Materials by Self-Assembly Method

Solvent Effects on the Solvothermal Synthesis of PureMonoclinic and Tetragonal Zirconia Nanoparticles

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature

Controllable synthesis of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 submicron sphere by hydroxide co-precipitation method

Phase Composition Controllable Preparation of Zirconia Nanocrystals Via Solvothermal Method

Preparation of Zirconia Powders by Sol-gel Process

Rapid and low-temperature preparation of zircon ceramic by hydrothermal-assisted sol-gel process and microwave sintering

High-Surface-Area Zeolitic Silica with Mesoporosity

Preparation of macroporous zirconia monoliths from ionic precursors via an epoxide-mediated sol-gel process accompanied by phase separation

Preparation and Self-assembly of Zirconia Nanoparticles Via Hydrothermal Method

Nanostructured ceramic powders by hydrothermal synthesis and their applications

Synthesis and Characterization of Yttria-Doped Mesoporous Zirconia

Pure monoclinic ZrO 2 prepared by hydrothermal method for isosynthesis

Effects of Precipitators and Surfactants on the Preparation of Zirconia Nanopowders via Solvothermal Method

Hydrothermal Synthesis of Stable Mesoporous ZrO2–Y2O3 and CeO2–ZrO2–Y2O3 from Simple Inorganic Salts and CTAB Template in Aqueous Medium

Synthesis and Characterization of Mesoporous Zirconia Molecular Sieve