Abstract:Natural gas with methane as the main constituent is a natural resource that exceeds the reserves of oil in abundance. With inevitable depletion of crude oil, methane will become the major resource for chemicals and liquid fuels in future decades. Extensive efforts have been afforded to both direct and indirect conversion of methane. The direct-conversion approaches involve, for example, the selective oxidation of methane to methanol or formaldehyde, the oxidative coupling of methane (OCM) to C2 species (C2H6 and C2H4) and so on. Since the pioneering work of Keller and Bhasin, much research has been carried out into developing highly efficient catalysts for OCM. Unfortunately, the per pass C2 yields on nearly all reported catalysts are less than 30 %. OCM is believed to occur through a heterogeneous–homogeneous pathway. The mechanism proposes first the catalytic formation of methyl groups on catalyst surface, which desorb as free radicals (CH3·) into the gas phase and ultimately react by predominantly homogeneous pathways. 8] It is generally agreed that some oxygen species O* adsorbed on the catalyst surface are the active oxygen species for the activation of methane to form methyl radicals and play a key role in the selective generation of C2, whereas gaseous oxygen molecules mainly favor the formation of COx. [9–12] By assuming a reaction mechanism via methyl radicals formed by the reaction of methane with surface oxygen species, an upper limit of 28 % for the C2 yield is forecasted for a continuous, CH4/O2 co-fed, single pass process under conventional conditions, such as those used for laboratory screening. The inherent reason for such a limited C2 yield is that the gaseous oxygen—as required oxidant for OCM—can react with the more reactive C2 product to form COx and, thus, a higher C2 selectivity is always compromised with a lower CH4 conversion. [14] To attain a high C2 yield, it is necessary to reduce the nonselective gaseous oxygen concentration. Perovskite oxides with mixed conductivities have been attracting increasing attention due to their potential applications in air separation, as catalysts for selective oxidation, and as reactors for the partial oxidation of hydrocarbons or for other oxygen-involving reactions. Moreover, in the past decade, halide-modified oxides have been widely studied for oxidative dehydrogenation of ethane (ODE) to ethylene and were proven to offer a significant improvement in the performance of the selective oxidation. In this study, a novel chlorinedoped Ba0.5Sr0.5Fe0.2Co0.8O3 d (denoted as BSCFCls) was used as catalyst for the OCM in a fixed-bed reactor. Furthermore, N2O was chosen as the oxygen source because it is a relatively weak oxidant, which is suitable for selective oxidation. Herein, we want to show that (a) the introduction of Cl into Ba0.5Sr0.5Fe0.2Co0.8O3 d enhances the selectivity for the methyl radical formation and (b) N2O as oxidant can effectively reduce gaseous oxygen concentration, since it provides oxygen in the form of surface oxygen species rather than gas-phase oxygen molecules by decomposition on the catalyst surface. Figure 1 shows the concept of OCM on perovskite oxide catalysts using N2O as oxidant.

A Study Of The Catalytic Properties Of Srti0.9m0.1o3-Delta Perovskite-Type Catalysts For Oxidative Coupling Of Methane

A Study Of The Catalytic Properties Of Srti1-Xmgxo3-Delta Perovskite-Type Catalysts For Oxidative Coupling Of Methane

A Study of the Catalytic Properties of SrTi1-xMg xO3-δ Perovskite-type Catalysts for Oxidative Coupling of Methane

A Study On Catalytic Properties Of Perovskite-Type Oxide Srtio3 Catalysts For Oxidative Coupling Of Methane

Characterization of Nanosized SrTiO3 Catalyst for Oxidative Coupling of Methane by in Situ ESR and TPSR

Improved Catalytic Activity and Stability of Ba Substituted SrTiO 3 Perovskite for Oxidative Coupling of Methane

In Situ ESR and TPSR Measurements of SrTi0.975Li0.025O3-δ Nanocatalysts for Oxidative Coupling of Methane at Low Temperature

Catalytic character of SrO: I. TPD study of surface active sites on SrO

Influence of Surface Composition of Perovskite-Type Complex Oxides on Methane Oxidative Coupling

The Catalytic Character of SrO Ⅱ.Study of the Decomposition of Isopropanol over MgO and SrO Catalysts

Deep Insight into the Mechanism of Catalytic Combustion of CO and CH 4 over SrTi 1– x B x O 3 (B = Co, Fe, Mn, Ni, and Cu) Perovskite via Flame Spray Pyrolysis

Effect of different oxygen species on the oxidative coupling of methane over TiO 2 catalysts

Alkali metal and alkaline earth metal perovskites for oxidative coupling of methane and oxidative dehydrogenation of ethane

Engineering Active Surface Oxygen Sites of Cubic Perovskite Cobalt Oxides Toward Catalytic Oxidation Reactions

A theoretical study of CO oxidation and O2 activation for transition metal overlayers on SrTiO3 perovskite

Oxidative Coupling of Methane with High C2 Yield by Using Chlorinated Perovskite Ba0.5Sr0.5Fe0.2Co0.8O3−δ As Catalyst and N2O As Oxidant

Catalytic combustion of methane over various perovskite-type oxides

Insights into the Role of Strontium in Catalytic Combustion of Toluene over La1-xSrxCoO3 Perovskite Catalysts.

La0.7(Ca, Sr)0.3Ni0.6Mn0.5O3 Perovskites for Photothermal Catalytic Reforming of Toluene: the Role of Oxygen Species in the Photothermal Synergistic Effect

Active oxygen center in oxidative coupling of methane on La2O3 catalyst

Influence of Dopants on Pt/Al2O3-Based Monolithic Catalysts for Autothermal Oxidative Coupling of Methane