Abstract:The isothermal oxidation behavior of Ti3AlC2 based material containing 5 vol% TiC inclusion in air had been investigated at 500–900 °C by means of TGA, XRD, Raman spectroscopy and SEM/EDS. It was demonstrated that, although Ti3AlC2 based material exhibited good oxidation resistance at temperatures above 700 °C, anomalous oxidation with higher oxidation rate occurred at lower temperatures of 500 and 600 °C. This interesting phenomenon was due to the formation of microcracks associated with the stress developed within the scales, mainly consisting of anatase, and the volume expansion as Ti3AlC2 based material was directly exposed to air at those temperatures. Its oxidation, at temperatures investigated with the exception of 600 °C, generally obeyed a parabolic rate law. The weight gain data for the remaining temperatures were analyzed with an instantaneous parabolic rate constant method by assuming a parabolic rate law. The variations of instantaneous parabolic rate constant with time reflected the complexity of the oxidation behavior of Ti3AlC2 based material. These variations were discussed from the viewpoint of the formation of microcracks at 500 °C, and preferred oxidation of TiC inclusion in the initial oxidation and its subsequent depletion at 800 and 900 °C on the basis of X-ray diffraction, Raman spectroscopy, SEM scale morphology observation and composition analysis using EDS. In addition, the deleterious effect of TiC inclusion on the oxidation resistance of Ti3AlC2 based material was also investigated and discussed with comparison to monolithic Ti3AlC2, which was helpful to understand the discrepancies in reports on the oxidation of Ti3AlC2.

High Temperature Oxidation Behaviors Of Ti-Cr Alloys With Laves Phase Ticr2

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Oxidizing Characteristics and Oxide Formation of V-4cr-4ti Alloy

Non-isothermal Oxidation and Ignition Prediction of Ti-Cr Alloys

High Temperature Oxidation Behaviors of Al/Cr Composite Coating on Ti2AlNb Alloy

The Effect of Cr Content on the Structural and Hydrogen Storage Characteristics of Ti10V80−xFe6Zr4Crx (x = 0–14) Alloys

High temperature oxidation behavior of a novel Ni-Cr-W-Al-Ti superalloy

High Temperature Oxidation and Wear Behaviors of Ti-V-Cr Fireproof Titanium Alloy

High-temperature oxidation behaviour of laser in situ synthesised Ti-Al-Cr-Nb alloy coating on Ti-6Al-4V

High-temperature oxidation behavior of double glow plasma Cr-Y alloyed layers on Ti 2 AlNb alloy

High-temperature oxidation behaviors and mechanisms in newly designed L1 2 -strengthened high-entropy alloys

Effect of Al content on 1200 °C steam oxidation behavior of Cr-based coatings on TZM alloy

Non-Isothermal Oxidation Behaviors and Mechanisms of Ti-Al Intermetallic Compounds.

High-Temperature Oxidation Resistance of High-Nb TiAl-Based Alloy

Oxidation Behavior of TiAl(Cr, Ag) at 900 °C in Water Vapor

Microstructure evolution during oxidation of quinary Ti 3 (AlSiSn)C 2 at high temperatures and induced probable performance

Oxidation Behavior of TiC-containing Ti3AlC2based Material at 500–900 °C in Air

Comparative Study On Oxidation Behavior Of Fe-5wt% Cr Alloy In Various Mixed Atmospheres At 900-1000 Degrees C

High-Temperature Oxidation of NbTi-Bearing Refractory Medium- and High-Entropy Alloys

EFFECT OF MCrAlY COATINGS ON OXIDATION RESISTANCE OF TiAl INTERMETALLICS

Exploring the high-temperature steam oxidation behaviors of the lean-Cr (7–10 wt%) FeCrAl alloys