Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

Key Items in Tire Non-Steady State Test

Static Tire/Road Stick–Slip Interactions: Analysis and Experiments

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

Test and Finite Element Simulation of Steady-State Temperature Field of Rolling Tire

Research on simplified tire finite element modeling and simulation method

Numberical Analysis on the Steady-State Rolling of Load-Carrying Tire

Theory Analysis of the Steady-State Surface Temperature on Rolling Tire

An empirical tire model for non-steady state side slip properties

Static Tire Properties Analysis and Static Parameters Derivation to Characterising Tire Model Using Experimental and Numerical Solutions

Electric Vehicle Tires Test Bench Design for Laboratory

Understanding tire/road stick-slip interactions with embedded rubber force sensors

On-line Testing of Tire Uniformity

EXPERIUMENT AND FINITE ELEMENT ANALYSIS OF STEADY-STATE TEMPERATURE DISTRIBUTION IN ROLLING TIRE UNDER DIFFERENT LOADS AND INITIAL INFLATION PRESSURES

Study on Performance and Application for Vehicle Brake Tester

Analysis of the Tire Steady-State Models

90-Degree Impact Bench Test and Simulation Analysis of Automotive Steel Wheel

Virtual Proving Ground of Tire Mechanical Characteristics

Study on Mechanics of Steady State Free Rolling Tires

A Fast and Accurate Tire Model for Vehicle Stability Control Simulation under All Working Conditions

The Test System Development of Tire Rolling Resistant Force Based on Wheel Torque Sensor

Evaluating the tire wear quantity and differences based on vehicle and road coupling method