Abstract:Refrigerant generating bubble pump (RGBP) is the main component of diffusion absorption heat transformer (diffusion AHT), which is of great significance for waste heat recovery and lack of theoretical and experimental investigations. In present work, a high-accuracy semi-empirical model with H2O-CaCl2-R134a of good thermal stability has been firstly proposed by introducing generation and friction coefficients, which correlated geometry and operational parameters. The performance of RGBP with five independent operational parameters was calculated by the model. Moreover, experiments with five independent operational parameters were conducted by a closed setup, to validate the availability of the semi-empirical model. In the theoretical and experimental analyses, the refrigerant flow rate was used to evaluate generating performance, while the solution flow rate and pumping ratio were used to evaluate pumping performance. The results were concluded that: (1) the mean relative errors of refrigerant and solution flow rates between experimental and theoretical results were rapidly reduced from 103.34 % and 340.66 % to 18.29 % and 5.46 % by using the semi-empirical model; (2) higher generating temperature, larger diffusion gas flow rate, smaller concentration and lower system pressure promoted refrigerant generation; (3) higher motive head and smaller diffusion gas flow rate led to the increase of the solution flow rate and pumping ratio. The investigations may partially reveal the operation mechanism of RGBP, and the semi-empirical model is useful to predict performance of RGBP and choose suitable conditions of RGBP for the diffusion AHT with better performance.

Characteristic of Flashing Flow of Refrigerant in a Capillary

Numerical Simulation and Experimental Study of Capillary Tubes

Combined Nucleation Theory and Models for Refrigerant Flow in a Capillary Tube

Study on Characteristic of the Two-Phase Flow of Refrigerant in a Capillary

Visualization of R1233zd(E) Flow Boiling in Parallel Mini-channels

Numerical Simulation And Experiment Research On Flow Characteristics Of Capillary In Refrigerator

Study On Flow Characteristic Of Refrigerant/Oil In A Capillary

General integral model of capillary tubes

Cavitation characteristics and suppression research of refrigerant in capillary tube

One-order Integral Model of Refrigerants Flowing Through Adiabatic Capillary Tubes

Metastable flow of R12 through capillary tubes

Theoretical and Experimental Research on the Performance of a Refrigerant Generating Bubble Pump with a High-Accuracy Semi-Empirical Model

Simulation on the Performance of Adiabatic Capillary Tubes With R410A Refrigerant

Experimental and Numerical Study on Cavitation Flow Characteristics of Refrigerants with Different Thermophysical Properties in Confined Micro-Clearance

NUMERICAL CALCULATION OF FLOW IN ADIABATIC CAPILLARY TUBE OF ALTERNATIVE REFRIGERANTS

An Approximate Analytic Model for Flow Through Capillary Tubes

An Assessment of Friction Factor and Viscosity Correlations for Model Prediction of Refrigerant Flow in Capillary Tubes

Experimental Study on the Relation Between Internal Flow and Flashing Spray Characteristics of R134a Using Straight Tube Nozzles

Fast Calculation Method for Modeling Non-adiabatic Capillary Tube

Advanced model for a non-adiabatic capillary tube considering both subcooled liquid and non-equilibrium two-phase states of R-600a

A New Model of Mass Flow Characteristics in Electronic Expansion Valves Considering Metastability