Flow boiling heat transfer characteristics and correlation development of R290/R600a mixtures in an internally threaded tube{fr}Caractéristiques de transfert de chaleur par ébullition en écoulement et développement de corrélations pour les mélanges R290/R600a dans un tube fileté interne
Cong Zhao,Yuwei Sun,Hao Guo,Yanxing Zhao,Maoqiong Gong,Zhiqiang Yang
DOI: https://doi.org/10.1016/j.ijrefrig.2024.02.017
IF: 4.14
2024-02-17
International Journal of Refrigeration
Abstract:Excessive hydrofluorocarbons (HFCs) usage significantly contributes to the global warming. Therefore, there is a widespread shift toward natural refrigerants with low global warming potential (GWP). Among these alternative refrigerants, R290, R600a, and their mixtures have gained considerable attention. However, their flammability limits the charge. To decrease the equipment volume and reduce the refrigerant charge, internally threaded tubes have been introduced to enhance the heat transfer. Therefore, in this study, flow boiling experiments were conducted on R290, R600a, and mixtures inside an internally threaded tube, obtaining heat transfer data under a pressure of 0.216-0.416 MPa, heat flux of 10.5-73.0 kW m −2 , mass flux of 70-190 kg m −2 s −1 . To quantitatively discern the dominant heat transfer mechanism, a dimensionless number Nz was introduced. In the nucleate boiling dominant region, an increase in the heat flux markedly enhances the heat transfer, with pressure and mass flux playing minor roles. Furthermore, the heat transfer deterioration trend of the mixtures aligns with the variation trends of concentration slip and boiling range. In the convective heat transfer dominant region, a rise in the mass flux significantly increases the heat transfer coefficient, while the pressure and heat flux have minor effects. Additionally, at high R290 mole fraction and vapor quality, high surface tension maintains a continuous liquid film, enhancing the heat transfer. Furthermore, new heat transfer correlations for flow boiling inside the internally threaded tubes were established, which exhibit a mean relative deviation of −2.30% and 8.80% for the obtained experimental results and collected data, respectively.
engineering, mechanical,thermodynamics