Abstract:Scanning electron microscope, atomic force microscope and other equipment play an important role in the fields of topography restoration and detection. However, these devices are generally used in nanometer-scale measurement scenarios. For wafer topography quality control scenarios ranging from microns to hundreds of microns, these technologies have problems such as high cost and slow detection speed. Therefore, developing new, low-cost, and high-precision methods is necessary. To address this problem, a wafer surface reconstruction framework is proposed based on the shape-from-focus principle. In view of the characteristics of the large area and micro-small height of the wafer, to solve the limitations of the existing shape from focus framework, which is generally based on a single field, we created a multi-field image sequence rapid acquisition system and proposed the use of pulse control methods to achieve rapid acquisition of large area images. On the other hand, this paper proposes a dual filtering framework combining the Levy flight filtering principle with the SOR algorithm in point cloud filtering to achieve a balance between smoothing the depth map and maintaining the detailed structure, reducing the impact of noise, and improving the morphology restoration accuracy. To avoid splicing seams between fields, the progressive detection multifield stitching technique is used to complete large-area depth data stitching. Experiments were conducted on both synthetic and real objects to verify the effectiveness of the proposed method. In terms of synthesized images, the accuracy of the three methods significantly improved after applying the proposed method framework. After applying the Tenenbaum method framework, its correlation and peak signal-to-noise ratio improved by 7.5% and 38.2%, respectively, and its root mean square error was reduced by 40.7%. The excellent accuracy reconstruction results of the proposed method was verified through accuracy evaluation experiments. The height errors of the three methods used were all higher than . However, after using the proposed method framework, the maximum error was only . The experimental results indicated that this method overcomes the area limitation of traditional SFF and is suitable for applying wafer surface morphology measurements.

A New Method of 2D Contour Extraction For Fast Simulation of Photolithographic Process

A Method for Extending Depth of Focus in STED Nanolithography

Simulation and Experimental Investigation of Immersion Flow Field in Immersion Lithography

Fast Wafer Focus Measurement System for Photolithography Using On-Axis Structure Illumination Method

New Modeling and Optimization Method Suitable for UDSM Lithography Simulation

High Performance Source Optimization Using A Gradient-Based Method in Optical Lithography

Simulation Of The Velocity Distribution For Immersion Lithography

A Fast Convolution Method and Its Application in Photomask Synthesis for Wafer Contour Fidelity Using Linear Basis Expansions

Fast Level-Set-Based Inverse Lithography Algorithm for Process Robustness Improvement and Its Application

Full Area Covered 3D Profile Measurement of Special-Shaped Optics Based on a New Prototype Non-Contact Profiler.

A highly effective and efficient cost-function-reduction method for inverse lithography technique

Source and Mask Co-Optimization Using A Gradient Based Method in Optical Lithography

Edge-based near-field photolithography optical proximity effect correction technique

A highly efficient optimization algorithm for pixel manipulation in inverse lithography technique

ILT Approach for Compensating 3-D Mask Effects

A Novel Anisotropic Wet Etching Process of (100)-Silicon with Areaefficiency on Convex Corner Compensation Patterns

An Optimization Strategy for 65 nm Node Photomasks

Optimized Self-Adapting Contrast Enhancement Algorithm for Wafer Contour Extraction

An Efficient Algorithm For Stencil Planning And Optimization In E-Beam Lithography

Gradient-Based Source And Mask Optimization In Optical Lithography

Wafer Surface Reconstruction Based on Shape From Focus