Abstract:Two kinds of adsorbates—L-ascorbic acid and NaOH were used separately to investigate the effects of adsorbate distribution between ethanol bulk phase and the phase of water-rich layer adsorbed by the surface of SiO2 particles on the preparation of silver nanoparticles on SiO2 particles. When the adsorbate L-ascorbic acid was used, L-ascorbic distributes mainly in the ethanol bulk phase and thus the Ag particle generating reaction will take place in the ethanol bulk phase with the generated Ag particle size of about 18 nm. When the adsorbate NaOH was used, NaOH distributes mainly in the phase of water-rich layer adsorbed on the surface of SiO2 particles and thus the Ag particles generate in the water-rich adsorption layer with particle size of only about 5.4 nm. Since the NaOH concentration effects its distribution between the two phases of ethanol bulk phase and water-rich adsorption layer, the further experiments with changing NaOH concentration in the reaction system from 0.0170 to 0.404 g·L-1 were conducted. Results show that when concentration of NaOH in the system was increased from 0.0170 to 0.135 g·L-1, the NaOH concentration in the water-rich adsorption layer increases with the increase of NaOH concentration in the system gradually, which causes the generation of Ag grains gradually centralizes in the adsorption layer with the grain size decreases from 8 nm to 5 nm, and the Ag particles generated cover the SiO2 more uniformly. When NaOH concentration in the system was increased from 0.135 to 0.404 g·L-1, the amount of NaOH in the system is over the maximum NaOH capacity that can be contained in the water-rich adsorption layer and thus the NaOH concentration in ethanol bulk phase will increase to the limit, above which, the Ag generating reaction rate in it will accelerate more quickly than that in the water-rich adsorption layer, which causes the main generation zone of silver nanoparticles moves from water-rich adsorption layer to ethanol bulk phase gradually, and at the same time, the generated Ag grain size will increase from 5 nm to 12 nm.

Effect of Lanthanum on the Combination of Silver Nanoparticles Prepared by Vacuum Deposition

Intermetallic Combination of Lanthanum and Silver Nanoparticles Prepared by Vacuum Deposition

Effect of Interphase Distribution of Reactants in Binary Liquids on Preparation of Silver Nanoparticles on Silica Particles

Effect of Lanthanum Doping on the Photocatalytic Activity of Titanium Dioxide

Influence of copper species on silver grain size in Ag–CuO–SiO2 ternary nanocomposites

Effect of La-Introduced Manner on the Phase Formation and Morphology of the Hydrothermally Synthesized Pb_(0.70)La_(0.30)TiO_3 Powders

Preparation and Microstructure of Silver Nanopowder with Spheric Morphology

Study on the effect of lanthanum-modified lead titanate nanocrystals

Photoluminescences properties of lanthanum-silver co-doped ZnO nano particles

Enhancement Effect of Terbium Complex Luminescence by Binding to Silver Nanoparticles in the Solution

Effect of Incorporation of Silver on the Electrical Properties of Sol-Gel-Derived Titania Film

Preparation and Surface Silver Loaded Modification of La2Sn2O7 Powder

Origin Of Luminescence Enhancement And Quenching Of Europium Complex In Solution Phase Containing Ag Nanoparticles

Synthesis of Ultrafine Lanthanum Hydroxide Nanorods by A Simple Hydrothermal Process

Electrophoretic deposition of ligand-stabilized silver nanoparticles synthesized by the process of photochemical reduction

Synthesis of Sn Nanoparticles and Their Size Effect on the Melting Point

Fluorescence lifetime modification in Eu:Lu2O3 nanoparticles in the presence of silver nanoparticles

Effect of lanthanum on inclusions in non-oriented electrical steel slabs

Preparation of Silver Nanoparticles Colloid by Pulsed Laser Ablation

Effects of Silver Nanoparticles on the Luminescent Properties of Europium Complex

Metal-enhanced Fluorescence of Lanthanide Chelates Near Silver Nanostructured Films