Abstract:The skeletal Ni P amorphous alloy(Raney Ni P) was prepared by alkali leaching a Ni P Al amorphous alloy obtained by the rapid quenching technique. Its amorphous structure was confirmed by both the XRD and EXAFS. By using liquid phase benzene hydrogenation, an important reaction in industrial production, the selectivity to cyclohexane and the catalytic activity(including hydrogen uptake rate, reaction conversion and TOF value) of the as prepared Raney Ni P catalyst were measured. In comparison with the corresponding Ni P amorphous alloy obtained via the traditional rapid quenching technique, the crystallized Raney Ni P, and Raney Ni which was widely used in industry, the Raney Ni P catalyst exhibited much higher activity besides the perfect selectivity to cyclohexane. The DSC analysis also revealed its high thermal stability. These results demonstrated its potential application in industrial processes. By measuring the effects of the benzene concentration, the hydrogen pressure, and the reaction temperature on the hydrogenation rate, the reaction kinetics and the apparent activation energies were determined, based on which, a plausible mechanism was proposed. The higher activity of Raney Ni P than that of traditional Ni P was mainly due to its higher surface area. While the higher activity of Raney Ni P than that of Raney Ni was mainly attributed to the nature of the active sites. Since no significant electronic interaction between Ni and P in Ni P amorphous alloy was found by XPS spectra, the geometric effect was considered as the main promoting effect, which was briefly discussed according to various characterizations, such as ICP, XRD, EXAFS, BET, and hydrogen chemisorption. The crystallization deactivation of Raney Ni P amorphous alloy was attributed to the change in both the surface area and the structure of the active sites.

Xrd, Sem and Edax Studies of the Preparation Process of Novel Raney-Ni Catalyst

Preparation of novel Raney-Ni catalysts and characterization by XRD, SEM and XPS

XRD and XPS Studies on the Ultra‐uniform Raney‐Ni Catalyst Prepared from the Melt‐quenching Alloy

A study on the Raney nickel catalysts prepared from Ni-Fe-Al alloys

Effect of Atomic Ordering Transformation of PtNi Nanoparticles on Alkaline Hydrogen Evolution: Unexpected Superior Activity of the Disordered Phase

Research, Development, and Application of Amorphous Nickel Alloy Catalysts Prepared by Melt-Quenching

Microcalorimetric studies of Raney nickel catalysts

General Preparation for Pt-Based Alloy Nanoporous Nanoparticles As Potential Nanocatalysts

Preparation and Characterization of Bulk and Supported NiB Amorphous Alloy Catalysts with Different Particle Sizes

Structural and Catalytic Properties of Skeletal Ni Catalyst Prepared from the Rapidly Quenched Ni50al50 Alloy

Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level

Preparation of skeletal Ni-P amorphous alloy and the study of its catalytic properties during benzene hydrogenation

Preparation of Raney Ni Catalyst and Research on Its Catalytic Hydrogenation Performance for Alkenyl Aromatics

A simple fabrication of mineral supported Ni-NiAl2O4 nanocomposites with a novel transition layer

Noble Metal Catalyzed Preparation of Ni2P/α-Al2O3

Structural and Compositional Behaviors of Shaped Pt Alloy Nanoparticle Electrocatalysts

Exploring the Influence of Nickel Precursors on Constructing Efficient Ni-based CO2 Methanation Catalysts Assisted with In-Situ Technologies

Effect of Preparation Process on Compressive Strength and Hydrogenation Performance of Raney-Ni/Al2o3 Catalyst

Fabrication of a novel nickel-nickel aluminate nanocomposite with improved nanoparticle dispersion

Skeletal Ni Catalysts Prepared from Ni–Al Alloys Rapidly Quenched at Different Rates: Texture, Structure and Catalytic Performance in Chemoselective Hydrogenation of 2-Ethylanthraquinone

Utilization of Active Ni to Fabricate Pt-Ni Nanoframe/Nial Layered Double Hydroxide Multifunctional Catalyst Through in Situ Precipitation