Abstract:The skeletal Ni P amorphous alloy(Raney Ni P) was prepared by alkali leaching a Ni P Al amorphous alloy obtained by the rapid quenching technique. Its amorphous structure was confirmed by both the XRD and EXAFS. By using liquid phase benzene hydrogenation, an important reaction in industrial production, the selectivity to cyclohexane and the catalytic activity(including hydrogen uptake rate, reaction conversion and TOF value) of the as prepared Raney Ni P catalyst were measured. In comparison with the corresponding Ni P amorphous alloy obtained via the traditional rapid quenching technique, the crystallized Raney Ni P, and Raney Ni which was widely used in industry, the Raney Ni P catalyst exhibited much higher activity besides the perfect selectivity to cyclohexane. The DSC analysis also revealed its high thermal stability. These results demonstrated its potential application in industrial processes. By measuring the effects of the benzene concentration, the hydrogen pressure, and the reaction temperature on the hydrogenation rate, the reaction kinetics and the apparent activation energies were determined, based on which, a plausible mechanism was proposed. The higher activity of Raney Ni P than that of traditional Ni P was mainly due to its higher surface area. While the higher activity of Raney Ni P than that of Raney Ni was mainly attributed to the nature of the active sites. Since no significant electronic interaction between Ni and P in Ni P amorphous alloy was found by XPS spectra, the geometric effect was considered as the main promoting effect, which was briefly discussed according to various characterizations, such as ICP, XRD, EXAFS, BET, and hydrogen chemisorption. The crystallization deactivation of Raney Ni P amorphous alloy was attributed to the change in both the surface area and the structure of the active sites.

Microcalorimetric studies of Raney nickel catalysts

Deactivation and Regeneration of Raney-Ni Catalyst During Multiphase Dehydrogenation of Cyclohexane

A study on the Raney nickel catalysts prepared from Ni-Fe-Al alloys

Catalytic Decomposition of N,N-dimethylformamide over Raney Ni Catalysts Modified with Sn

Preparation of novel Raney-Ni catalysts and characterization by XRD, SEM and XPS

Influence of Mo Modified Raney Nion Liquid Catalytical Hydrogenation of 2,4-Difluoronitrobenzene

Metals Leaching Mechanism of Fe or/and Mo Modified Raney-Ni Catalysts and Their Catalytic Hydrogenation of Glucose

XRD and XPS Studies on the Ultra‐uniform Raney‐Ni Catalyst Prepared from the Melt‐quenching Alloy

Xrd, Sem and Edax Studies of the Preparation Process of Novel Raney-Ni Catalyst

Research, Development, and Application of Amorphous Nickel Alloy Catalysts Prepared by Melt-Quenching

Preparation of Raney Ni Catalyst and Research on Its Catalytic Hydrogenation Performance for Alkenyl Aromatics

Microcalorimetric Studies of CO and H2 Adsorption on Nickel, Nickel−Boride, and Nickel−Phosphide Catalysts

General Preparation for Pt-Based Alloy Nanoporous Nanoparticles As Potential Nanocatalysts

A Plate-Type Anodic Alumina Supported Nickel Catalyst for Methane Steam Reforming

Effect of Preparation Process on Compressive Strength and Hydrogenation Performance of Raney-Ni/Al2o3 Catalyst

Preparation of skeletal Ni-P amorphous alloy and the study of its catalytic properties during benzene hydrogenation

Thermal Stability of Skeletal Rapidly Quenched Ni Catalyst

Carbon-Supported Raney Nickel Catalyst for Acetone Hydrogenation with High Selectivity

Structural and Catalytic Properties of Skeletal Ni Catalyst Prepared from the Rapidly Quenched Ni50al50 Alloy

Investigation of the Performance and Deactivation Behavior of Raney-Ni Catalyst in Continuous Dehydrogenation of Cyclohexane under Multiphase Reaction Conditions

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane