Abstract:The production of hydrogen by water electrolysis has emerged as a promising pathway to achieve a 100% renewable and sustainable hydrogen economy. Up to now, alkaline water electrolysis has been highlighted as a truly alternative strategy for hydrogen production due to the usage of non-expensive electrocatalysts. Ni-based electrocatalysts already have a long century history because of high conductivity, stability, and earth abundancy. However, their strong hydrogen interaction energy slows the Hydrogen Evolution Reaction (HER) activity. Tuning the morphology of the catalyst by increasing the active surface area (e.g., production of nanosheets, nanowires, nanoparticles, etc.) and enhancing the intrinsic activity (e.g., doping, alloying, etc.) can improve the catalytic activity. Binary and ternary alloys based on nickel are a common route to boost their intrinsic activity and tune the morphology. Ternary alloys like CuAlNi, NiMoFe and NiMoW have been previously proposed, although the role of each element is still not fully investigated. Among the alloys, Ni-Fe mixtures have shown better catalytic activity towards HER, and the Mo incorporation has resulted in a reduced onset potential due to favorable hydrogen-metal interaction and development of active sites. The strategy for NiFeMo synthesis is mainly by hydrothermal method or electrodeposition which are limited by low material loading and production volume. Therefore, searching for a technique which is capable of producing trimetallic alloys with a scalable amount is of high interest for the development of hydrogen production. Here, we studied the preparation of FeNi 3 Mo x via a fast and straightforward solution precursor plasma spraying (SPPS) method. The liquid precursors containing metal salts of Ni, Fe, and Mo are used to produce trimetallic solid solutions. The non-stoichiometric nanostructured electrocatalysts are deposited onto stainless-steel mesh (SS-mesh), Ni foam, and carbon paper for the HER in alkaline. We found that tuning Mo content (~9 At%) in the solution precursor conducts to an improved overpotential of 112 mV (iR-corrected) at -10 mA cm -2 and a Tafel slope of 109 mV dec -1 in agreement with a Volmer-Heyrovsky HER route. Energy dispersive X-ray spectroscopy (XPS) has confirmed the reduction in the superficial Ni and Fe oxides with Mo insertion which is directly affecting the electron transport. In addition, to investigate the effect of Mo in more detail, we evaluated the work function using ultraviolet photoelectron spectroscopy (UPS) which shows that Mo incorporation changes linearly the electrocatalyst's work function and it is highly correlated to the hydrogen binding energy. Consequently, the change in the work function, resulting in a weaker hydrogen adsorption energy which leads to an improved hydrogen production. Theoretical catalytic activity maps from Density Functional Theory (DFT) studies have revealed the enhanced HER activity is the responsibility of the active sites near the superficial Mo atoms. Figure 1

Metals Leaching Mechanism of Fe or/and Mo Modified Raney-Ni Catalysts and Their Catalytic Hydrogenation of Glucose

Influence of Mo Modified Raney Nion Liquid Catalytical Hydrogenation of 2,4-Difluoronitrobenzene

Acid-Resistant Performance of Ni-Based Hydrogenation Catalysts Supported by Hydrophobic Activated Carbon

Alloying Nickel with Molybdenum Significantly Accelerates Alkaline Hydrogen Electrocatalysis

Effect of Mo on the Structure and Catalytic Behavior of the Rapidly Quenched Skeletal Ni-Mo Catalysts

Design of Highly Efficient Ni-based Water-Electrolysis Catalysts by a Third Transition Metal Addition into Ni3Mo

Revealing the Role of Mo Leaching in the Structural Transformation of NiMo Thin Film Catalysts upon Hydrogen Evolution Reaction

A study on the Raney nickel catalysts prepared from Ni-Fe-Al alloys

Co-deposition of Ni–Mo alloy film catalysts for hydrogen evolution from an ethylene glycol system

Glucose Hydrogenation to Sorbitol over a Skeletal Ni-P Amorphous Alloy Catalyst (raney Ni-P)

Tuning Mo Incorporation in Ni-Fe-Mo Solid Solutions: Towards an Improved Hydrogen Adsorption Energy

Non‐Stoichiometric NiFeMo Solid Solutions; Tuning the Hydrogen Adsorption Energy via Molybdenum Incorporation

Catalytic activity of Ni–Cr–Fe–Mo porous materials for hydrogen evolution reaction in alkaline media

Nickel aluminate spinel-derived catalysts for aqueous-phase hydrogenolysis of glycerol with in-situ hydrogen production: Effect of molybdenum doping

Preparation of novel Raney-Ni catalysts and characterization by XRD, SEM and XPS

Ni-Modified Ag/SiO2 Catalysts for Selective Hydrogenation of Dimethyl Oxalate to Methyl Glycolate

Heterogeneous Structure of Ni–Mo Nanoalloys Decorated on MoOx for an Efficient Hydrogen Evolution Reaction Using Hydrogen Spillover

Role of Oxidized Mo Species on the Active Surface of Ni–Mo Electrocatalysts for Hydrogen Evolution under Alkaline Conditions

Heterogeneous Ni and MoOx co-loaded CeO2 catalyst for the hydrogenation of fatty acids to fatty alcohols under mild reaction conditions

Enhanced Electrocatalytic Activity of Mo-Doped NiFe Layered Double Hydroxide Nanosheet Arrays for the Hydrogen Evolution Reaction

Molybdenum Carbide/Ni Nanoparticles Embedded into Carbon Nanofibers as an Effective Non-Precious Catalyst for Green Hydrogen Production from Methanol Electrooxidation