Abstract:The interior noise of a pure electric vehicle (EV) is quieter than that of a traditional internal combustion engine vehicle (ICEV). However, if the noise masking effect of an ICEV is not employed, structure-borne noise from the suspension in an EV will become prevalent, although the interior noise weakens when the EV is driven at a moderate speed. Identifying the sources of suspension structure-borne noise is necessary to reduce the interior noise in an EV and improve the vehicle sound quality. However, the suspension system comprises many components and noise sources, making the identification and reduction of suspension structure-borne noise in an EV a challenging task. In this paper, a new noise source identification method based on interval analysis is proposed. This method can not only accurately identify the sources of noise but also provide details regarding modification methods for reducing interior noise. To implement this method, a test EV was used for measurement, and 15 tests constructed through experimental design were carried out to record the interior noise and vibrations of suspension components. The results showed that the suspension structure-borne noise of the test vehicle was distributed mainly below a frequency of 400 Hz. The feasible intervals and noise source contributions were calculated via the interval analysis method, and the front spring and rear shock absorber were identified as the major sources of suspension structure-borne noise. In addition, component parameters were optimized through the interval analysis method. In accordance with the suggested modification method, a verification test was implemented, illustrating that the EV interior noise quality was improved and validating the effectiveness of the proposed method. The presented approach may be regarded as a promising method for identifying and optimizing vehicle noise sources. (C) 2020 Elsevier Ltd. All rights reserved.

Research on Control of Car Interior Noise due to Engine Vibration

Research on Interior Noise Control of the Rear Seats in Vehicle

Interior Noise Analysis of a Non-load Type Body SUV

An Objective and Subjective Study on Global Active Control of Engine Noise in a Car

Coupled Analysis of Engine Noise and Interior Noise of an Automobile

Study of NVH performance improvement for a four-cylinder diesel engine body

Research on Control Technology of Automobile Vibration and Noise Reduction

Study on active noise control inside automobile cabin

Effect of Engine Compartment Structure on Interior Noise during Acceleration

Damping Optimization Noise Reduction Technique Based on Modal and Panel Contribution Analysis

Research on the Interior Noise Contributed from a Local Panel's Vibration of an Elastic Thin-Walled Cavity

Automotive Powertrain Vibration Isolation Control Difficulties and Passive Mounting Improvement Technologies

Auto-Body Structure Noise Performance Analysis and Optimization Research

Coupled optimization of internal combustion engine radiated noise and interior noise

Study On Adaptive Active Control Of Unstable Noise In Vehicle

TRANSFER PATH ANALYSIS AND CONTROL OF AUTOMOTIVE INTERIOR STRUCTURE-BORNE NOISE GENERATED BY A POWERPLANT

Investigation on Main Noise Sources of Vehicle Gasoline Engine by Sound Intensity Measurement

An Analysis Study on the Effects of Tire Wear on the Interior Vibration and Noise of Vehicles

Vibration transfer path analysis and path ranking for NVH optimization of a vehicle interior

Active Noise Control Using a Body-Mounted Vibration Actuator to Enhance the Interior Sound of Vehicle

A Novel Interval Analysis Method to Identify and Reduce Pure Electric Vehicle Structure-Borne Noise