Abstract:Polyacrylonitrile/poly (vinylidene fluoride) fibrous membranes were prepared by electrospinning of PAN and PVdF solution and were soaked in 1 M lithium perchlorate (LiClO4) in ethylene carbonate (EC)/diethyle carbonate (DEC) (1:1 wt.%) solution in order to prepare polymer electrolyte membranes. Response surface method (RSM) was used to obtain a quantitative relationship between selected electrospinning parameters, i.e., applied voltage, solution concentration, and PVdF content. The measured response is ionic conductivity of electrolyte membranes. The Box–Behnken method was applied to design of experiments. Importance of parameters in the model was determined by analysis of variance (ANOVA). The model was used to find the maximum ionic conductivity of electrolyte membranes as optimum result. The morphology of fibers was investigated by field emission scanning electron microscopy (FESEM). FESEM results show that the PAN/PVdF membrane has interconnected multifibrous layers with ultrafine porous structure that leads to a high ionic conductivity and efficient lithium ion transport. Produced fibrious membranes show uniform morphology. Average fiber diameter lies between 116 and 379 nm, and membranes have high porosity of 48–90 % and electrolyte uptake of 303–493 %. The polymer electrolyte membranes show good ionic conductivity in the order of 10−3 S cm−1 at ambient temperature. Ionic conductivity decreases with increase of solution concentration and increases with increase of PVdF composition. Voltage has no significant effect on ionic conductivity of the membranes. The model predicted the maximum ionic conductivity of 7.98 mS cm−1 when the voltage was set at 21.57 kV, the solution concentration set at 14.02 wt.%, and the PVdF composition set at 69.48 wt.%.

INVESTIGATION ON STRUCTURE AND CONDUCTIVITY OF MICROPOROUS PAN ELECTROLYTE

Preparation Of Pvdf/P(Mma-Co-Pegma) Porous Membranes Via Phase Inversion Process For Gel Polymer Electrolyte

Porous polymer electrolytes with high ionic conductivity and good mechanical property for rechargeable batteries

Structure and performance of porous polymer electrolytes based on P(VDF-HFP) for lithium ion batteries

Porous PAN micro/nanofiber membranes with potential application as Lithium-ion battery separators: physical, morphological and thermal properties

Structural and electrochemical properties of micro-porous polymer blend electrolytes based on PVdF-co-HFP-PAN for Li-ion battery applications

Porous PAN micro/nanofiber separators for enhanced lithium-ion battery performance

Influence of chemical microstructure of single-ion polymeric electrolyte membranes on performance of lithium-ion batteries

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Structure and ionic conductivity of porous polymer electrolytes based on PVDF-HFP copolymer membranes

Preparation of P(AN–MMA) Microporous Membrane for Li-ion Batteries by Phase Inversion

In Situ Polymerization Derived from PAN-Based Porous Membrane Realizing Double-Stabilized Interface and High Ionic Conductivity for Lithium-Metal Batteries

Conductivities and Transport Properties of Microporous Molecular Sieves Doped Composite Polymer Electrolyte Used for Lithium Polymer Battery

Investigation on PVDF-HFP microporous membranes prepared by TIPS process and their application as polymer electrolytes for lithium ion batteries

Lithium ion conduction in polymer electrolytes based on PAN

Novel electrospun PAN–PVC composite fibrous membranes as polymer electrolytes for polymer lithium-ion batteries

Development of electrospun PVdF–PAN membrane-based polymer electrolytes for lithium batteries

Optimization of ionic conductivity of electrospun polyacrylonitrile/poly (vinylidene fluoride) (PAN/PVdF) electrolyte using the response surface method (RSM)

Preparation of P(AN-MMA) Gel Electrolyte for Li-ion Batteries

Composition regulation of polyacrylonitrile-based polymer electrolytes enabling dual-interfacially stable solid-state lithium batteries

Poly(Acrylonitrile-Methyl Methacrylate) Based Microporous Gel Electrolyte for Li-Ion Battery