Abstract:Single ion conducting polymer electrolytes (SIPEs) have attracted much attention due to their ability to effectively inhibit the growth of lithium dendrites, but still confront the problems of low ionic conductivity and poor mechanical properties. In this study, a new polybenzimidazole-based ionomer (M-OPBI) is synthesized by chemically modifying aromatic poly(2,2′-(p-oxydiphenylene)-5,5′-bibenzimidazole) (OPBI), and two series of novel SIPEs (i.e. M-OPBI/PEO and M-OPBI/PVDF) are achieved after blending with different polymer matrices (i.e. poly(ethylene oxide) (PEO) and poly(vinylidene fluoride) (PVDF)). Afterwards, some single ion conducting gel polymer electrolytes (SIGPEs) with abundant Li+ transport channels are fabricated by absorbing appropriate amount of plasticizers. The imidazole anions and sulfonylimide anions in the ionomer present low binding energies with Li+, which is beneficial for the dissociation and transport of Li+. Moreover, in view of the presence of rigid aromatic structure in the main chain of the ionomer and the interactions between the polymers, polybenzimidazole-based SIPEs all exhibit excellent thermal and mechanical properties. Most importantly, in comparison with PVDF matrix, PEO is approved to be more compatible with the ionomer and provide additional Li+ conduction sites, and this will enhance the interfacial compatibility and facilitate the construction of abundant Li+ transport channels in M-OPBI/PEO membranes. As a result, M-OPBI/PEO-0.4 membrane shows the lowest activation energy of 0.098 eV, the highest room-temperature ionic conductivity of 9.9 × 10-5 S cM-1, and a satisfactory lithium ion transference number of 0.88. Thanks to these merits, the symmetric Li||Li cell assembled with M-OPBI/PEO-0.4 membrane exhibits an excellent reversible lithium plating/stripping performance without short circuit over 2160 h. This study provides a new design strategy for the development of SIGPEs for application in dendrite-free lithium metal batteries.

Influence of chemical microstructure of single-ion polymeric electrolyte membranes on performance of lithium-ion batteries

PVDF porous matrix with controlled microstructure prepared by TIPS process as polymer electrolyte for lithium ion battery

Preparation Of Pvdf/P(Mma-Co-Pegma) Porous Membranes Via Phase Inversion Process For Gel Polymer Electrolyte

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Effects of Components in Solvent-Enhanced PVDF-HFP-Based Polymer Electrolyte on Its Electrochemical Performance

Building Up Ion-Conduction Pathways in Solid Polymer Electrolytes Through Surface and Pore Functionalization of PVDF Porous Membranes with Ionic Conductors

Structure and performance of porous polymer electrolytes based on P(VDF-HFP) for lithium ion batteries

Creating ionic channels in single-ion conducting solid polymer electrolyte by manipulating phase separation structure

Semi Closed Coordination Structure Polymer Electrolyte Combined in Situ Interface Engineering for Lithium Batteries

Morphological modulation of the PBI membrane and performance optimization for Li-metal battery

An Efficient Route to Polymeric Electrolyte Membranes with Interparticle Chain Microstructure Toward High‐Temperature Lithium‐Ion Batteries

Porous Membrane Host-Derived In-Situ Polymer Electrolytes with Double-Stabilized Electrode Interface Enable Long Cycling Lithium Metal Batteries

Study on single-ion solid-state polymer lithium-ion electrolyte membranes

PIM‐1 as a Multifunctional Framework to Enable High‐Performance Solid‐State Lithium–Sulfur Batteries

Fabrication of a porous polymer electrolyte from poly(vinylidene fluoride-hexafluoropropylene) via one-step reactive vapor-induced phase separation for lithium-ion battery

In-situ generated solid-state electrolytes with intimate interface affinity enable conductivity and high performances for lithium–ion batteries

A Novel Composite Microporous Polymer Electrolyte Prepared with Molecule Sieves for Li-ion Batteries

Ion transport and structural design of lithium-ion conductive solid polymer electrolytes: a perspective

A fiber-reinforced solid polymer electrolyte by in situ polymerization for stable lithium metal batteries

Highly conductive and mechanically robust single-ion conducting polymer electrolyte membranes with a high concentration of charge carriers for dendrite-proof lithium metal batteries

Single Ion Conducting Gel Polymer Electrolytes Containing Polybenzimidazole-Based Ionomers with Abundant Li+ Transport Channels for Dendrite-Free Lithium Metal Batteries