Abstract:Journal of Composite Materials, Ahead of Print. In this study, a three-dimensional random representative volume element model was constructed using the finite element method combined with Python script to investigate the residual stress distribution in SiCp/Al composites with varying volume fractions, particle shapes, and particle size under thermal cycling conditions. The model has two different particle morphologies: spheres and irregular polygons. The results show that the irregular polygonal SiC particles exhibit higher residual stresses than spherical particles before and after thermal cycling due to their complex load transfer pathways and higher stress concentration at particle corners, which makes them more consistent with the characterization of SiCp/Al composites under practical application conditions. As the volume fraction of SiC particles increases, the particle spacing decreases, hindering the release of thermal stresses through plastic deformation. Notably, the relief rate of residual stress reached 53% in the 12 vol% SiCp/Al composites, with the stress decreasing from 698 MPa to 328 MPa after 50 thermal cycles. In contrast, the reduction rate for 18 vol% composites is only 13% after thermal cycling. Furthermore, compared to larger particles (7.3 μm, 8.9 μm), the smaller particles (4.3 μm, 5.9 μm) exhibit a more uniform stress distribution and lower thermal stresses before and after thermal cycling. Consequently, our work provides a significant theoretical basis for the design and application of SiCp/Al composites, especially for the application of materials under extreme temperature changes.

Influence of Vibratory Stress Relief on Thermal Residual Stress and Tensile Strength of SiCW／Al Composite

Investigating the Effects and Mechanisms of Thermal–Vibration-Coupled Stress Relief Treatment on Residual Stress in SiC/Al Composites

Relaxation of residual stresses in 20%SiCw/6061Al composite as-extruded at high temperature

Dimensional Stability And Thermal Stress Of 6061ai/Sicw Composite During Thermal Cycles

Effects of Thermal Residual Stress Creeping on Microstructure and Tensile Properties of SiC Whisker Reinforced Aluminum Matrix Composite

The relaxation behavior of thermal stress in a SiCw/Al composite

Relaxation Behavior of Residual Stress in an Extruded Tube of the SiCw/Al Composite at High Temperature

Influence of pre-plastic deformation on thermal residual stress and yield strength of SiCw/Al composites

Thermal Residual Stress and Its Modification in a SiC-Whisker/Mg Composite

Effect of thermal residual stress on the tensile properties and damage process of C/SiC composites at high temperatures

STUDY ON THE RELATIONSHIP BETWEEN THERMAL EXPANSION BEHAVIOR AND INTERNAL STRESSES OF AN SiC WHISKER REINFORCED COMPOSITE

Effect of Ultrasonic Vibration Tensile on the Mechanical Properties of High-Volume Fraction SiCp/Al Composite

Effect of Different Dimensional Stability Treatments on Microstructure and Mechanical Properties of SiC_p/2024Al Composite

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Effect of heat treatment on dislocation states and work hardening behaviors of SiCw/6061Al composite

Thermal cycling of silicon carbide whisker reinforced ZL101A composite

Thermal Residual Strain in Silicon Carbide Whisker Reinforced Aluminium-Matrix Composite

Study of the residual stress distribution in SiCp/Al composites under thermal cycling conditions

The performance transition of C/SiC composites induced by redistribution of residual stress

Finite Element Simulation Study of Ultrasonic Vibration-Assisted Tensile High-Volume Fraction SiCp/Al Composite

Variation of the Thermal Stress in the Al18b4o33w/Al Composite During Low Temperature Cycling