Effect of thermal shock induced dislocation multiplication on the thermal conductivity of 60 vol% SiCp/Al–7Si composites
Kang Wang,Wenfang Li,Shuoxun Jin,Zhongmiao Liao,Zhiyu Wang,Yuanguang Xia,Yuanguang Xia,Huaican Chen,Huaican Chen,Bingbing Wan,Wen Yin,Wen Yin,Tongguang Zhai,Kang Wang,Wenfang Li,Shuoxun Jin,Zhongmiao Liao,Zhiyu Wang,Yuanguang Xia,Huaican Chen,Bingbing Wan,Wen Yin,Tongguang Zhai
DOI: https://doi.org/10.1016/j.coco.2023.101554
IF: 8
2023-04-01
Composites Communications
Abstract:Dislocation affects the thermal conductivity and coefficient of the thermal expansion of high-volume fraction SiCp/Al composites. However, it still remains unclear to what extent the dislocation density in the composite would be increased by thermal shock. Herein, the as-cast 60 vol% SiCp/Al–7Si composites produced via the gas-infiltration technique possess a relatively low porosity but significant lattice misfit at the interfaces. The aqueous- and liquid nitrogen-quenching exerted on the as-cast samples can produce fractures at the SiCp/Al interfaces at different extent. The neutron diffraction technique is carried out to investigate the effect of thermal shock treatments on volume-averaged dislocation densities in the composites. Results show that the dislocation configuration of the composites with as-cast and aqueous-quenching states are similar, but different from that of the sample with a liquid nitrogen-quenching state. Compared with the as-cast composite, the aqueous-quenching and liquid nitrogen-quenching treatments cause the significant increase of dislocation density. However, it only results in a relatively slight reduction of the thermal conductivity of the aluminum matrix. This work provides some references for the dislocation density determination in the high-volume fraction metal matrix composites.
materials science, composites