Abstract:Carbon fiber reinforced polymer (CFRP) composites are commonly used for reflectors of artificial satellites operating in low earth orbit (LEO). The decay of the modulus of the CFRP composite varies under different thermal cycling environments, which can lead to a reduction in the accuracy of the reflector panels, affecting the transmission of signals. This paper investigates the impact of different thermal cycling conditions on the mechanical behavior of carbon fiber/epoxy laminated composites experimentally. Three kinds of thermal cycling conditions involving continuous temperature changes are employed to explore the influence of temperature range on the residual tensile and in-plane shear moduli of the laminates. Test results indicate that the upper temperature limit and the temperature span of the thermal cycling conditions jointly affect the mechanical properties of CFRP composite laminates, but the responses of the residual tensile and in-plane shear moduli are different under the variation of each temperature parameter alone. The residual tensile and in-plane shear moduli of the laminates under thermal cycling decrease with an expansion of the temperature span having the same upper limit. If the temperature span remains constant, an increase in the upper temperature limit leads to an increase in the residual tensile modulus, but a decrease in the residual in-plane shear modulus. The main damages causing the decay of residual tensile and in-plane shear moduli of unidirectional laminates were investigated by scanning electron microscopy (SEM) technology. Observations of the microscopic fracture of the material show that the post-curing reaction factor predominantly influences the residual tensile modulus of unidirectional laminates, while the fiber/matrix interface damage factor dominates the residual in-plane shear modulus of the unidirectional laminates. Furthermore, an increase in the fiber tensile modulus decreases both residual tensile and residual in-plane shear moduli. Notably, the residual in-plane shear modulus exhibits greater sensitivity to thermal cycling compared to the residual tensile modulus. The findings reported in this paper would provide valuable insights and guidance for the design and application of carbon fiber/epoxy composites subjected to thermal cycling conditions.

Deformation Study on Carbon-Fiber Braided Composite Subjected to Low Temperature Cycle

Experimental Study of Mechanical Properties of CFRP under Different Strain Rates and Temperatures

Effects of temperature and strain rate on impact compression behaviors of three-dimensional carbon fiber/epoxy braided composites

Thermal Shock Behavior of Twill Woven Carbon Fiber Reinforced Polymer Composites

High-speed infrared imaging and mesostructural analysis of localized temperature rise in damage and failure behavior of 3-D braided carbon/epoxy composite subjected to high strain-rate compression

Experimental study of thermal expansion behavior on braided structure composite

Longitudinal compression fatigue properties of 3D five-directional braided composites at different temperatures

A novel mechanical behavior and failure mechanism analysis of 3D six-directional braided composites in liquid nitrogen subjected to compression

Experimental and numerical research of temperature on tensile properties of multiaxial warp‐knitted composites

Longitudinal tensile analysis of carbon fiber/epoxy composites under the coupling effect of high and low temperature cycle-humidity-bending load

On the mechanical behavior of carbon fiber/epoxy laminates exposed in thermal cycling environments

High-Strain-Rate Compression Behavior and Failure Mechanism of 3d Mwk Carbon/Epoxy Composites

Revealing low temperature-mechanical coupling failure mechanisms in CFRP laminates with in-situ observations

Internal shear damage evolution of CFRP laminates ranging from -100°C to 100°C using in-situ X-ray computed tomography

Experimental and multiscale modeling investigations of cryo-thermal cycling effects on the mechanical behaviors of carbon fiber reinforced epoxy composites

Effects of temperature and low strain rate on tensile performance of aramid fiber bundle

Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression

Effect of temperature and moisture composite environments on the mechanical properties and mechanisms of woven carbon fiber composites

On the tensile properties and failure mechanisms of 3D six-directional braided composites at elevated temperatures

Dynamic In-Plane Shear Mechanical Behavior of Carbon Fiber/Epoxy Composite at Different Temperatures

A novel pultrusion method and axial compression behavior of 3-D braiding-winding-pultrusion composite tubes at different temperatures