Abstract:This research explores the transverse tensile properties of a unidirectional carbon fiber/epoxy composite under quasi-static and dynamic conditions, across various temperatures (-30, 25, 85 degrees C). To conduct the investigation, a universal testing machine and a split Hopkinson tensile bar are utilized. The findings reveal that the transverse tensile properties are influenced by temperature and strain rate. At -30, and 25 degrees C, the quasi-static stress and strain curves exhibit linearity, while at 85, nonlinearity is observed. On the other hand, the dynamic stress and strain curves demonstrate approximate linearity across all temperatures. The quasi-static tensile strength decreases with rising temperature, but the dynamic tensile strength remains relatively unaffected by temperature variations. Furthermore, both the quasi-static and dynamic tensile elastic moduli decrease as temperature increases. The transverse tensile strength and elastic modulus exhibit an approximately linear relationship with the logarithm of the strain rate. The study also delves into the analysis of fracture morphologies and mechanisms through macroscopic and microscopic observations. By introducing the dynamic enhancement factor of strain rate, the formulas of the transverse tensile strength and elastic modulus at different temperatures are proposed. These formulas provide a comprehensive representation of the experimental results.Highlights Tensile properties at different temperatures and strain rates are tested. Stress and strain curves at various temperatures and strain rates are studied. Variation of tensile properties with temperature and strain rate is analyzed. Change of fracture mechanism with temperature and strain rate is discussed. Formulas for transverse tensile strength and elastic modulus are given. Mechanical properties and fracture mechanisms of carbon fiber/epoxy composite at various temperatures and strain rates. image

Dynamic In-Plane Shear Mechanical Behavior of Carbon Fiber/Epoxy Composite at Different Temperatures

Experimental Investigation and Modeling of Dynamic Thermomechanical Behavior of 4-Harness Satin Weave Carbon/epoxy Composites

Transverse Tensile Behavior of Carbon Fiber/epoxy Composite at Different Temperatures and Strain Rates

Temperature Effects on Transverse Failure Modes of Carbon Fiber/bismaleimides Composites

Study on the Mechanical Performances of Carbon Fiber/epoxy Composite Material Subjected to Dynamical Compression and High Temperature Loads

Temperature and Strain Rate Sensitivity of Modulus and Yield Strength of Epoxy Resin under Compressive Loads

Effects of Temperature on Tensile Strength of Carbon Fiber and Carbon/Epoxy Composite Sheets

Time-temperature Dependent Mechanical Properties of Cured Epoxy Resin and Unidirectional CFRP

Mechanical Behavior and Failure Mechanism of Three-Dimensional Braided Composites at Different Temperatures

Strain Rate and Temperature Effect on Mechanical Properties and Failure of 3D Needle-Punched Carbon/Carbon Composites under Dynamic Loading

Effects of temperature and strain rate on impact compression behaviors of three-dimensional carbon fiber/epoxy braided composites

Strain Rate Effect on Mechanical Properties of 3D Needle-Punched C/C Composites at Different Temperatures

Experimental and Numerical Study of the Interfacial Shear Strength in Carbon Fiber/Epoxy Resin Composite under Thermal Loads

The temperature effect on the inter-laminar shear properties and failure mechanism of 3D orthogonal woven composites

Correlation of temperature dependences of macro- and micro-interfacial properties in carbon fiber/epoxy resin composite

Effect of temperature on flexural and interlaminar shear strength properties of carbon‐epoxy composites: Experiment and modeling

Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites

Investigation of Temperature Effect on Thermo-Mechanical Property of Carbon Fiber/peek Composites

Effects of space environment temperature on the mechanical properties of carbon fiber/bismaleimide composites laminates

Effect of temperature on bending properties and failure mechanism of three-dimensional multiaxial warp-knitted carbon/epoxy composites

Monte-Carlo Simulation to the Tensile Mechanical Behaviors of Unidirectional Composites at Low Temperature