Abstract:Comparing with the abundant experimental investigations on the pool boiling heat transfer, this study aims to explore the integrated effect of engineered microchannels and the mixed wettability on the enhancement in pool boiling heat transfer in a wide range of geometric and physical conditions. A two-dimensional transient volume of fluid (VOF) model was adopted to simulate the bubble behavior and thermal performance on different surfaces including the hydrophilic plain, hydrophilic microchannel, hydrophilic microchannel with hydrophobic top, and hydrophilic microchannel with hydrophobic bottom, respectively. The vapor volume fraction, velocity vector field, temperature of solid/liquid interface, and average heat transfer coefficients (HTCs) on different geometric surfaces were obtained based on the numerical model. It was found that hydrophobic areas are necessary to be added in the hydrophilic channels to facilitate the bubble nucleation and detachment due to the merit of the mixed wettability. However, it is crucial to optimize the width and location of the hydrophobic areas and the height of the hydrophilic microchannel for the prevention of early formation of vapor blanket and promotion of liquid replenishment. With the hydrophobic area on the top of the microchannel, the maximum solid/liquid interface temperature was 392.8 K, which decreased by 0.91 % comparing with that on the hydrophilic microchannel. While with a hydrophobic bottom ( W 1 = 2 and 4 μm), the max average HTCs were 508.2 kW/(m 2 K) and 503.5 kW/(m 2 K), which were 16.4 % and 11.4 % higher than that in hydrophilic microchannel ( W 1 = 2 and 4 μm), respectively. The simulation results indicate that the microchannel with optimized mixing of the wettability can efficiently promote the bubble to move upward and liquid to rewet along with the hydrophilic wall, forming the separation of vapor-liquid pathways to further enhance pool boiling heat transfer.

Boiling Heat Transfer on Porous Surfaces with Vapor Channels

Dual Porous Model for Boiling Heat Transfer on Porous Surfaces with Vapor Channels

Pool boiling heat transfer and simplified one-dimensional model for prediction on coated porous surfaces with vapor channels

BOILING HEAT TRANSFER ON SURFACES COATED BY POROUS WICK WITH VAPOR CHANNELS

Role of Trapped Liquid in Flow Boiling Inside Micro-Porous Structures: Pore-Scale Visualization and Heat Transfer Enhancement.

Experimental Investigation into Flow Boiling Heat Transfer and Pressure Drop in Porous Coated Microchannels

Enhanced Boiling Heat Transfer on Composite Porous Surface

Experiment study of flow boiling heat transfer characteristics in horizontal rectangular channel

Comparative Experimental Study on Pool Boiling Performance of Porous Coating and Solid Structures with Reentrant Channels

Subcooled Flow Boiling With Sintered Porous Coatings In Small Channel

Simulation on pool boiling heat transfer considering the integrated effect of engineered microchannels and mixed wettability

Boiling Phenomenon and Heat Transfer in Bead-packed Porous Structure

Characteristics of Heat Transfer for Narrow Gap on Horizontal Heated Surface with Porous Media

Pool-boiling Liquid Backflow Characteristics in Thin Porous Coatings

Bubble behavior in microchannel with saturated and subcooled boiling

Local Heat Transfer in Subcooled Flow Boiling in a Vertical Mini-Gap Channel

Experimental Investigation of Boiling of Droplets on Heated Surfaces

Experimental Investigation on Narrow Gap Heat Transfer with Porous Media under Downward-Facing Horizontal Heated Surface

Experimental investigation on interface characteristics and heat transfer during bubble condensation in narrow rectangular channel

Enhancement of Pool Boiling Heat Transfer on Porous Surface Tube

Experimental Study on the Heat Transfer of Water Boiling Flow in Narrow Horizontal Rectangular Channels