Abstract:Micro-structured surfaces have a significant impact on the flow boiling process in microchannels, but few numerical studies have been carried out due to their complex nature. In this study, the numerical investigation of flow boiling on micro-fin, micro-cavity, and smooth surfaces in a microchannel was conducted, with water serving as the working fluid. The volume-of-fluid (VOF) method, the phase change model, and solid-fluid thermal coupling were adopted in an OpenFOAM solver to perform the computation. The enhancing effects and detailed mechanisms of the micro-fin and micro-cavity surfaces on the heat transfer process are discussed, and the influences of wettability on these surfaces are investigated. With a contact angle of 60°, the heat transfer coefficient of the micro-fin surface was 61.92% larger, and the overall thermal resistance was 36.64% lower than that of a smooth surface, respectively. The confined bubbles on the micro-fin surface had a much smaller dryout area on the heated wall due to the capillary wetting effect. Moreover, the micro-fin surface with the rising nucleate bubbles can induce vortexes, which strengthens the convective heat transfer. As for the micro-cavity surface, it had a moderate heat transfer enhancement with a 17.16% larger heat transfer coefficient and a 13.55% lower thermal resistance when compared with a smooth surface. When the wettability of a heating surface is enhanced, the dryout area is minimized. Thus, the heat transfer performance of the smooth and micro-cavity surfaces is enhanced. The enhancement resulting from modified surface wettability has less of an effect on the micro-fin surface because the micro-fin array serves a similar function to minimize the dryout area.

Role of Trapped Liquid in Flow Boiling Inside Micro-Porous Structures: Pore-Scale Visualization and Heat Transfer Enhancement.

Pool boiling inside micro-nano composite pores: Thermofluids behaviors and heat transfer enhancement

Consideration of Heat Transfer Enhancement Mechanism of Nano- and Micro-Scale Porous Layer Via Flow Visualization

Pool boiling heat transfer and simplified one-dimensional model for prediction on coated porous surfaces with vapor channels

Coupling droplets/bubbles with a liquid film for enhancing phase-change heat transfer

Flow Boiling in Microchannels Enhanced by Parallel Microgrooves Fabricated on the Bottom Surfaces

Silicon microchannels flow boiling enhanced via microporous decorated sidewalls

Boiling Heat Transfer with a Well-Ordered Microporous Architecture

Study of the Natural Circulation Flow Boiling Heat Transfer Based On Partially Superhydrophilic Surface Modification

Supercapillary Architecture‐Activated Two‐Phase Boundary Layer Structures for Highly Stable and Efficient Flow Boiling Heat Transfer

Experimental investigations into flow boiling heat transfer in a micro-channel with hybrid of fin and porous coating structure

Heat Transfer Characteristics and Flow Pattern Visualization for Flow Boiling in a Vertical Narrow Microchannel

High heat flux dissipation of membrane-venting heat sink with thin film boiling

Heat transfer, pressure drop and flow patterns of flow boiling on heterogeneous wetting surface in a vertical narrow microchannel

Enhancement of Flow Boiling Heat Transfer in Microchannel Using Micro-Fin and Micro-Cavity Surfaces

Local Heat Transfer of Saturated Flow Boiling in Vertical Narrow Microchannel

Synergistic Effects of Hydrophilic-Hydrophobic Porous Structures for Enhancing Nucleate Pool Boiling Heat Transfer

Examination of two-phase behaviors in porous media during pool boiling

Pool-boiling Liquid Backflow Characteristics in Thin Porous Coatings

Experimental Study Of Saturated Flow Boiling In Vertical Narrow Microchannel