Abstract:Sintered porous coating tubes are high performance heat transfer components which are used to enhance boiling heat transfer. Sintering metal powder particles on the surfaces of plain tubes form porous coatings with numerous cavities which can promote nucleation of bubble generation in boiling processes and thus enhance boiling heat transfer enhancement. In the present study, experiments of the subcooled and saturated flow boiling heat transfer characteristics on the sintered porous coating tubes were conducted. The test tubes with porous coatings have an outer diameter of 25 mm, a length of 1 m and the coating thicknesses are 0.06 mm, 0.12 mm, 0.18 mm, and 0.25 mm, respectively. The heat transfer performance of high flux tubes is evaluated with a mass flow rate ranging from 128.3 to 252.03 kg/m 2 ·s and the saturation temperature of the experimental section is controlled between 45 and 50°C. The influence of flow conditions, heat flux, and properties of the sintered layer on boiling heat transfer was discussed. The results indicate that sintered porous media can effectively reduce the degree of superheating required for boiling heat transfer, but they also inevitably increase in flow resistance. Remarkably, the heat transfer enhancement due to the porous media increases up to a certain point and then decreases, while the flow resistance increases as the sintered layers thicken. The maximum heat transfer coefficient of the sintered tube with a sintered thickness of 0.06 mm is 1.6 times greater than that of a smooth tube. However, increasing the thickness of the porous layer does not always enhance heat transfer. The effects of different particle sizes of the sintered grains and the thickness of the sintered layers under the conditions of subcooled boiling and the onset of nucleate boiling have been analyzed to understand the physical mechanisms. An empirical heat transfer correlation has been proposed according to the experimental results for the sake of design calculation in industry.

Boiling Phenomenon and Heat Transfer in Bead-packed Porous Structure

Enhanced Boiling Heat Transfer on Composite Porous Surface

Role of Trapped Liquid in Flow Boiling Inside Micro-Porous Structures: Pore-Scale Visualization and Heat Transfer Enhancement.

Pool boiling inside micro-nano composite pores: Thermofluids behaviors and heat transfer enhancement

Boiling Heat Transfer with a Well-Ordered Microporous Architecture

Examination of two-phase behaviors in porous media during pool boiling

Bubble dynamics analysis of pool boiling heat transfer with honeycomb micro-nano porous structured surfaces

Experimental investigation on heat transfer of flow boiling in stacking porous media

Visualization-based nucleate pool boiling heat transfer enhancement on different sizes of square micropillar array surfaces

Pool boiling heat transfer and simplified one-dimensional model for prediction on coated porous surfaces with vapor channels

Influence of Hydrodynamic Interactions among Multiple Bubbles on Convective Heat Transfer in Nucleate Boiling

Synergistic Effects of Hydrophilic-Hydrophobic Porous Structures for Enhancing Nucleate Pool Boiling Heat Transfer

Experimental studies of flow boiling heat transfer in sintered/stacking porous media

Boiling Heat Transfer on Porous Surfaces with Vapor Channels

Experiments on Fluid Flow and Heat Transfer in a Packed Channel Between Two Parallel Grooved Plates

Consideration of Heat Transfer Enhancement Mechanism of Nano- and Micro-Scale Porous Layer Via Flow Visualization

Pool-boiling Liquid Backflow Characteristics in Thin Porous Coatings

Flow boiling instability characteristics in microchannels with porous-wall

Lattice Boltzmann Study of Pool Boiling Heat Transfer Enhancement on Structured Surfaces

Study of enhanced heat transfer performance of subcooled and saturated flow boiling with R365mfc on sintered porous coating high heat flux tubes

Heat transfer, pressure drop and flow patterns of flow boiling on heterogeneous wetting surface in a vertical narrow microchannel