Abstract:Shell-and-tube heat exchangers are the most common type of heat exchangers in oil refineries and other large chemical processes. In this manuscript, we demonstrate that the shell-side flow in a cylindrical shell was not as homogeneous as that in a rectangular shell. According to the periodic flow field and the arrangement of tubes in the rectangular shell, the solid-fluid coupling heat transfer model consisting of a single tube section and the outer and inner fluids was developed to represent the whole heat exchanger. Using this model, the relationship among four temperatures, namely the inlet and outlet temperatures of tube-side fluid and the upstream and downstream temperatures of shell-side fluid, was established. By dividing each tube into several tube sections at the sites of baffles, a method for predicting the temperature field of the rectangular shell-and-tube heat exchanger was proposed. Based on the node temperature correlation, all the node temperatures were obtained by iterative computation using the established relationship between the four temperatures and the operating conditions. It was found that the temperature distribution of the fluid in tube was approximately linear along axial direction, but the temperature of tube showed nonlinear regularity. The axial deformation compatibility condition for the tube bundle and shell was considered when resolving the stresses in tubes. For the model established in this paper, the mean temperature of the tube at lower position was found to be larger than that at higher position; hence the thermal expansion of the tube at the lower end is larger. In the case the tube-side fluid was heated, all tubes were pulled because of the larger axial thermal expansion of shell, and the stress in the tube with higher temperature is smaller because of the smaller strain.

Modified Heat Transfer Model Of Paired-Tubes In Wound-Tube Heat Exchanger

Thermodynamic optimization analysis of a tube-in-tube helically coiled heat exchanger for Joule-Thomson refrigerators

Study on Design Calculation of the Wound-Tube Heat Exchanger in Hydrogen Recovery System

Transient Thermal Stress and Temperature Change Rate Analysis of Fixed Tubesheet

Numerical and Experimental Study on a Tube-in-tube Heat Exchanger Working at Liquid-Hydrogen Temperature with a Large Temperature Span

The Coupled Process-Component Modeling and Optimization for Heat Exchanger of Supercritical CO2 with Property Variation Based on Heat Current Method

A SIMPLE MODEL FOR HEAT TRANSFER ANALYSIS OF SHELL-AND-TUBE WITH PHASE CHANGE MATERIAL AND ITS PERFORMANCE SIMULATION

Numerical analysis on the flow and heat transfer characteristics of heat exchanger with cruciform tube

Numerical study of heat transfer characteristics of intermittent flow cold storage surface heat exchanger

Temperature Field Prediction of Rectangular Shell-and-Tube Heat Exchanger

Experimental Study on Enhanced Heat Transfer Capability of the Array of Microtubes

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

A SIMPLE MODEL FOR HEAT TRANSFER ANALYSIS OF FLAT-PLATE HEAT EXCHANGER WITH PCM AND THERMAL PERFORMANCE SIMULATION

Numerical Analysis of H-type Finned-tube Heat Exchanger

Numerical simulation of flow and heat transfer performance of tube-shell coupled helically coiled corrugated tube heat exchanger

Energy Flow Model for Heat Transfer Systems With Phase Change Fluids and Its Applications

SIMULATION ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER USING DIFFERENT FLUIDS

Modeling of Thermal Energy Storage Shell-and-Tube Heat Exchanger

Experimental and numerical simulation study of a novel double shell-passes multi-layer helically coiled tubes heat exchanger

Thermal & Structure Coupling Field Analysis of Fixed Tube-sheet Heat Exchanger based on ANSYS

A thermal calculation model for tubular condensing heat exchanger