Abstract:<p>Printed circuit heat exchanger (PCHE) is an alternative competitor to be employed in the Liquid Natural Gas (LNG) regasification as vaporizers to meet the increasing demand for the clean energy in the economic development. Different models have been proposed so far for the PCHE, where the majority of them are simplified to a single channel to reduce the computational cost and time. Conventional methods have remarkable challenges, including high computational expense and limitations in engineering applications. In order to resolve these shortcomings, an innovative analysis and design method is proposed in the present study. In the present study, an innovative analysis and design method is proposed, which is based on the thermal network method. The proposed method benefits from both numerical and analytical approaches. It obtains the overall thermal-hydraulic performance of both cold and hot sides and captures the sharp variations of the thermodynamic properties of the supercritical nitrogen. The cross-flow PCHE is divided into a set of typical layers. Moreover, the typical layer is assumed to consist of a set of units, which include cold and hot channels and walls. These units are managed by a code that couples the thermal-hydraulic performance by both hot and cold fluid beginning from the given inlet conditions. Considering the flammable and explosive properties of Natural Gas (NG), liquid nitrogen is selected as the cold fluid. Furthermore, the thermal-hydraulic performance of the cross-flow PCHE is analyzed with different inlet conditions. Heat transfer and flow performance of the supercritical nitrogen is significantly affected by its thermal properties. It is observed that the heat transfer effectiveness increases as the inlet pressure of the cold fluid increases, which is due to the improvement of the overall nonuniformity and coordination angle of heat transfer coefficients. According to the performance evaluation criteria, the evaluation of the thermal-hydraulic performance of cross-flow PCHE is determined by inlet conditions of both cold and hot sides.</p>

Study on Design Calculation of the Wound-Tube Heat Exchanger in Hydrogen Recovery System

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

A thermal calculation model for tubular condensing heat exchanger

Numerical and Experimental Study on a Tube-in-tube Heat Exchanger Working at Liquid-Hydrogen Temperature with a Large Temperature Span

Modified Heat Transfer Model Of Paired-Tubes In Wound-Tube Heat Exchanger

Flow pattern analysis and multi-objective optimization of helically corrugated tubes used in the intermediate heat exchanger for nuclear hydrogen production

Numerical Analysis of Steam Reformer of Steam Methane Reforming Hydrogen Production System Connected with High Temperature Gas Cooled Reactor

Numerical Investigation on Thermal–hydraulic Characteristics of the Helically Corrugated Tube in Intermediate Heat Exchangers for Very-High-temperature Gas-Cooled Reactors

Optimization Design and Performance Study of a Heat Exchanger for an Oil and Gas Recovery System in an Oil Depot

Coupled heat transfer simulations for evaluation of thermal performance during hydrogen absorption in cylindrical uranium-based hydride beds

Numerical simulation of heat transfer performance of different heat exchange tubes in heat recovery steam generator

Large-eddy Simulation of Turbulent Flow and Heat Transfer of Helically Corrugated Tubes in the Intermediate Heat Exchanger of a Very-High-temperature Gas-Cooled Reactor

Methodology of design and analysis on the thermal hydraulic performance of the cross-flow printed circuit heat exchanger

Investigation of a Falling Film Tube Bank Heat Exchanger with Baffle Design for Water Recovery Applications

Numerical Study of Solid State Hydrogen Storage System with Finned Tube Heat Exchanger

A numerical study on convective condensation of flue gas in tubular heat exchangers

Optimization of solution flow rate and heat transfer area allocation in the two-stage absorption heat exchanger system based on a complete heat and mass transfer simulation model

Stainless steel finned tube heat exchanger design for waste heat recovery

Numerical Simulation and Optimization of In-Vessel Primary Heat Exchangers of NHR200-II

Numerical Study on Comprehensive Performance of Flow and Heat Transfer Coupled with Ortho-Para Hydrogen Conversion

Fast Design and Numerical Simulation of a Metal Hydride Reactor Embedded in a Conventional Shell-and-Tube Heat Exchanger