Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Thermodynamic optimization analysis of a tube-in-tube helically coiled heat exchanger for Joule-Thomson refrigerators

Performance Optimization of an Irreversible Carnot Refrigerator with Finite Mass Flow Rate

Design Optimization of Thermoelectric Cooling Systems for Applications in Electronic Devices

Numerical and Experimental Study on a Tube-in-tube Heat Exchanger Working at Liquid-Hydrogen Temperature with a Large Temperature Span

Optimization of heat sink of thermoelectric cooler using entropy generation analysis

Numerical Simulations of a Micro-Channel Wall-Tube Condenser for Domestic Refrigerators

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

Analysis of Features of J-T Refrigeration Cycles Using Mixed Refrigerants with an Infinite Low Temperature Heat Reservoir

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Variable-dimension optimization study and design of internally finned helically coiled tubes heat exchangers based on numerical simulation and experiment

Minimization of the Total Area of Heat Exchangers in Refrigeration Systems Based on the Entransy Theory

Numerical study of heat transfer characteristics of intermittent flow cold storage surface heat exchanger

Regulation of throttling distribution and characteristic analysis for a microchannel Joule-Thomson (J-T) cooler

Optimum allocation of heat transfer surface area for cooling load and COP optimization of a thermoelectric refrigerator

Effects of pipe turns on vertical helically coiled tube heat exchangers for water heating in a household refrigerator

Thermal-Hydraulic Performance and Optimization of Tube Ellipticity in a Plate Fin-And-Tube Heat Exchanger

A theoretical global optimization method for vapor-compression refrigeration systems based on entransy theory

Simulation and Optimization Study on the Performance of Fin-and-Tube Heat Exchanger

An Optimization Method for Gas Refrigeration Cycle Based on the Combination of Both Thermodynamics and Entransy Theory

Design Criteria of Different Heat Exchangers for the Optimal Thermodynamic Performance of Regenerative Refrigeration Systems

Validation and Application of a Finned Tube Heat Exchanger Model for Rack-Level Cooling