Abstract:In bridge structure monitoring and evaluation, deformation data serve as a crucial basis for assessing structural conditions. Different from discrete monitoring points, spatially continuous deformation modes provide a comprehensive understanding of deformation and potential information. Terrestrial laser scanning (TLS) is a three-dimensional deformation monitoring technique that has gained wide attention in recent years, demonstrating its potential in capturing structural deformation models. In this study, a TLS-based bridge deformation mode monitoring method is proposed, and a deformation mode calculation method combining sliding windows and surface fitting is developed, which is called the SWSF method for short. On the basis of the general characteristics of bridge structures, a deformation error model is established for the SWSF method, with a detailed quantitative analysis of each error component. The analysis results show that the deformation monitoring error of the SWSF method consists of four parts, which are related to the selection of the fitting function, the density of point clouds, the noise of point clouds, and the registration accuracy of point clouds. The error caused by point cloud noise is the main error component. Under the condition that the noise level of point clouds is determined, the calculation error of the SWSF method can be significantly reduced by increasing the number of points of point clouds in the sliding window. Then, deformation testing experiments were conducted under different measurement distances, proving that the proposed SWSF method can achieve a deformation monitoring accuracy of up to 0.1 mm. Finally, the proposed deformation mode monitoring method based on TLS and SWSF was tested on a railway bridge with a span of 65 m. The test results showed that in comparison with the commonly used total station method, the proposed method does not require any preset reflective markers, thereby improving the deformation monitoring accuracy from millimeter level to submillimeter level and transforming the discrete measurement point data form into spatially continuous deformation modes. Overall, this study introduces a new method for accurate deformation monitoring of bridges, demonstrating the significant potential for its application in health monitoring and damage diagnosis of bridge structures.

WAVELET-BASED ANALYSIS TECHNIQUE FOR THE MONITORING OF TALL STRUCTURE UNDER NORMAL LOADING USING GPS

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Monitoring the vertical changes of a tidal flat using a MEMS accelerometer array

Monitoring on the Lifting of a Steel Structure Gallery

Development of Laser-Based Displacement Monitoring System and Its Application to Large-Scale Spatial Structures

Data analysis and dynamic characteristic investigation of large-scale civil structures monitored by RTK-GNSS based on a hybrid filtering algorithm

Study For Real-Time Monitoring Of Large-Span Bridge Using Gps

High-rate bridge displacement monitoring with low-rate virtual reference station data

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

Design of the wireless system for health monitoring of a large span gymnasium structure

Experimental Study of Accuracy of High-Rate GNSS in Context of Structural Health Monitoring

Data analysis to Real Time Displacement Monitoring of Humen Bridge by GPS(RTK)

Bridge Dynamic Displacement Monitoring Using Adaptive Data Fusion of GNSS and Accelerometer Measurements

Development and Application of the High Precision Beidou Deformation Monitoring System in Shenzhen Ping'an Financial Center

Vertical Deformation Monitoring of the Suspension Bridge Tower Using GNSS: A Case Study of the Forth Road Bridge in the UK

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Structural Health Monitoring of a Tall Building with Huge Floating Platform

High-Precision Monitoring Method for Bridge Deformation Measurement and Error analysis Based on Terrestrial Laser Scanning

WAVELET TRANSFORM BASED METHOD FOR DETECTING DAMAGE LOCATION OF ELECTRICITY TRANSMISSION TOWERS

An Integrated GNSS/MEMS Accelerometer System for Dynamic Structural Response Monitoring under Thunder Loading

Monitoring and Analyzing of the Yunyang Zhangfei Temple Landslide