Abstract:The preparation of a homogeneous mixture of (Al2O3 + C) precursor is the key step for the successful synthesis of AlN powders by the carbothermal reduction and nitridation method. In the present work, the homogeneous (Al2O3 + C) precursor prepared by a modified low temperature combustion synthesis (MLCS) method by using aluminum nitrate, glucose, and urea as materials exhibited high reaction activity. Furthermore, in order to absolutely control the MLCS process and continuously improve the properties of (Al2O3 + C) precursor, the reaction model of preparing precursors from various molar ratios of urea to aluminum nitrate (U/Al) was investigated by carrying out thermodynamic calculation and by performing experiments in the present work. The whole process was found to involve various phenomena. First, the type and amount of various generated nitrogen-containing gases (N2, NO, N2O, N2O3, N2O4, and NO2) vary with the change of U/Al during combustion process. Second, under the present experimental condition of ignition temperature, the decomposition reaction of aluminum nitrate is more prone to occur than the combustion reaction of urea. Third, the real reaction system with U/Al = 2.5 reaches the highest combustion temperature which is well consistent with the propellant chemical theory. The occurrence of above phenomena was discussed in detail. Moreover, the reaction mechanism of synthesizing precursor from U/Al = 1 with high reaction activity was investigated by using various techniques such as FTIR, XRD, and DTA.

Mechanism of Mechanical Activation Synthesis of Aluminum Nitride

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

Mechanism of carbothermal synthesis of aluminium nitride

AlN ceramics synthesized by carbothermal reduction of mechanical activated Al2O3

Synthesis of Aluminum Nitride Using Sodium Aluminate as Aluminum Source

Mechanical activation assisted combustion synthesis of AlN-Al2O3 composite ceramic powder

On Advancemeat of Carbothermal Reduction of Alumina by High Energy Ball Milling

Study on the mechanism of aluminum nitride synthesis by chemical vapor deposition

Ab initio and experimental study of the mechanism of alumina carbothermal reduction and nitridation under vacuum

Mechanical-activation-assisted combustion synthesis of α-SiAlON in air

Synthesis of Aluminium Nitride by Direct Nitridation of Molten Al-Mg-Si Alloys

Synthesis of AlN from Al2O3activated by plasma assisted ball milling

Combustion synthesis Si3N4 powders by using activation process

Reaction Model and Mechanism of Preparing (Al2O3 + C) Precursor for Carbothermal Synthesis of AlN by a Modified Low Temperature Combustion Synthesis Method

Effect of Mechanical Activation on the Morphology and Microstructure of Ni-Al-Ti-B Composite Powders

One-step Mechanochemical Transformation of Bulk Pseudo-Boehmite into Nanosized Α-Al2o3

Self-propagating high-temperature synthesis of AlN in a graphite crucible in air by mechanical activation

An insight into the process and mechanism of a mechanically activated reaction for synthesizing AlH3 nano-composites

Synthesis of Meso/macroporous Aluminum Nitrides Via Aluminum Alloy Ceramization

Thermodynamic and kinetic analyses of vacuum synthesis of AlN by the alumina carbothermal reduction nitridation method

Ab initio and experimental study on the mechanism of Al4C3 nitridation in vacuum to prepare AlN