Abstract:Aluminium nitride (AlN) is an important technical ceramic with outstanding strength and thermal conductivity that has important applications for advanced heat sink materials and as a reinforcement for metal-based composites. In this study, we report a novel, straightforward and low-cost method to prepare AlN powder using a vacuum tube furnace for the direct nitridation of loose aluminium powder at low temperatures (down to 500 ∘C) under flowing high-purity nitrogen. Small amounts of magnesium powder (1 wt.%), combined with aluminium, promote nitridation. Here, we characterise the effects of time (up to 12 h) and temperature (490 to 560 ∘C) on nitridation with the aim to establish an effective regimen for the controlled synthesis of an aluminium nitride reinforcement powder for the production of metal matrix composites. The extent of nitridation and the morphology of the reaction products were assessed using scanning electron microscopy and X-ray diffraction analyses. AlN was detected for all nitriding temperatures ≥ 500 ∘C, with the highest yields of 80% to 85% obtained at 530 ∘C for times ≥ 1 h. At this temperature, nitridation proceeded rapidly, and there was extensive agglomeration of the reaction products making it difficult to reprocess into powder. At lower temperatures around 510 ∘C, a relatively high proportion of AlN was attained (>73% after 6 h) while retaining excellent friability so that it could be manually reprocessed to powder. The synthesised reinforcement consisted of micro- or nano-crystalline AlN comingled with metallic aluminium. The ratio of AlN and metallic aluminium can be readily controlled by varying the nitriding temperature. This provides a flexible and accessible method for the production of AlN-reinforcement powders suited to the production of metal matrix composites.

Mechanism of carbothermal synthesis of aluminium nitride

Synthesis of aluminum nitride by nitridation of γ-Al 2O3 nanopartlcles in flowing ammonia

Synthesis of Aluminum Nitride Using Sodium Aluminate as Aluminum Source

Thermodynamic and kinetic analyses of vacuum synthesis of AlN by the alumina carbothermal reduction nitridation method

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

Synthesis of Aluminum Nitride by Nitridation of γ-Al<sub>2</sub>O<sub>3</sub> Nanoparticles in Flowing Ammonia

Gas‐Phase and Solid‐State Simultaneous Mechanism for Two‐Step Carbothermal AlON Formation

Synthesis of Aluminum Nitride by Nitridation of Γ-Al2o3 Nanoparticles in Flowing Ammonia

Impacts of Temperature and Time on Direct Nitridation of Aluminium Powders for Preparation of AlN Reinforcement

Self-propagating high-temperature synthesis of AlN in a graphite crucible in air by mechanical activation

Synthesis of aluminum nitride fibres from aluminum silicate fibres by carbothermal reduction method

Synthesis of Ultrafine AlN Powders in an Al-OC-N System

Synthesis of Aluminium Nitride by Direct Nitridation of Molten Al-Mg-Si Alloys

Thermal stability and selective nitridation of Cr2AlC in nitrogen at elevated temperatures

Carbothermal Reduction Synthesis of Aluminum Nitride from Al(OH)3/C/PVB Slurries Prepared by Three-Roll Mixing

CARBOTHERMIC REDUCTION SYNTHESIS AND REACTION DYNAMICS OF ALUMINUM OXYCARBIDE

Reaction Model and Mechanism of Preparing (Al2O3 + C) Precursor for Carbothermal Synthesis of AlN by a Modified Low Temperature Combustion Synthesis Method

Hydrothermal-carbothermal synthesis of highly sinterable AlN nanopowders

Growth of Spontaneous Nucleation AlN Crystals by Al-Base Alloy Evaporation in Nitrogen Atmosphere

Carbothermal Synthesis of Spherical AlN Granules: Effects of Synthesis Parameters and Y2O3 Additive

Preparation of Spherical AlN Granules Directly by Carbothermal Reduction–Nitridation Method