Abstract:Carbon-based composite materials, denoted as C/C composites and possessing high thermal conductivity, were synthesized utilizing a three-dimensional (3D) preform methodology. This involved the orthogonal weaving of mesophase pitch-based fibers in an X (Y) direction derived from low-temperature carbonization, and commercial PAN-based carbon fibers in a Z direction. The 3D preforms were saturated with mesophase pitch in their raw state through a hot-pressing process, which was executed under relatively low pressure at a predetermined temperature. Further densification was achieved by successive stages of mesophase pitch impregnation (MPI), followed by impregnation with coal pitch under high pressure (IPI). The microstructure and thermal conductivity of the C/C composites were systematically examined using a suite of analytical techniques, including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and PLM, amongst others. The findings suggest that the volumetric fraction of fibers and the directional alignment of the mesophase pitch molecules can be enhanced via hot pressing. The high graphitization degree of the mesophase pitch matrix results in an increased microcrystalline size and thus improved thermal conductivity of the C/C composite. Conversely, the orientation of the medium-temperature coal pitch matrix is relatively low, which compensates for the structural inadequacies of the composite material, albeit contributing minimally to the thermal conductivity of the resultant C/C composites. Following several stages of impregnation with mesophase pitch and subsequent impregnation with medium-temperature coal pitch, the 3D C/C composites yielded a density of 1.83 and 2.02 g/cm3. The thermal conductivity in the X (Y) direction was found to be 358 and 400 W/(m·K), respectively.

Microstructural characteristics of pitch-based carbon-carbon composites

Mesophase formation of coal-tar pitches used for impregnant of C/C composites

Mechanical and thermal conduction properties of carbon/carbon composites with different carbon matrix microstructures

Fabrication And Characterization Of A New Pitch-Based Acnt/C Nanocomposites

Pressure-Strengthened Carbon Fibers from Mesophase PitchCarbonization Processes

Effects of Carbonization Pressure on Microstructure of Graphitized Pitch-derived Carbons

Microstructure and mechanical properties of carbon graphite composites reinforced by carbon nanofibers

Pressure-Strengthened Carbon Fibers from Mesophase Pitch Carbonization Processes

Differences and correlations between microstructure and macroscopic properties of mesophase cokes derived from the components of high temperature coal tar pitch

Microstructural investigation and performance of carbon matrix composites developed through facile pitch modification route

Analysis of the properties of two kinds of coal tar pitches used for impregnation of C/C composite

Analysis of transverse thermal conductivity for mesophase pitch-based carbon fibers and the through-thickness heat conduction of their composites

Microstructure of high thermal conductivity mesophase pitch-based carbon fibers

The Microstructure and Thermal Conductive Behavior of Three-Dimensional Carbon/Carbon Composites with Ultrahigh Thermal Conductivity

Mesoscopic structure and properties of liquid crystalline mesophase pitch and its transformation into carbon fiber

In Situ Fabrication of Carbon Nanotube/Mesocarbon Microbead Composites from Coal Tar Pitch

Characteristics of the mesophase and needle coke derived from the blended coal tar and biomass tar pitch

Densification Behavior and Performances of C/C Composites Derived from Various Carbon Matrix Precursors

Experiments and Modeling for Thermal Conductivity of Graphite Nanoplatelets/carbon Composites

Understanding the Molecular Arrangement and Orientation Characteristics of Mesophase Pitch and Its Fibers via a Polarized Light Microscope

Effect of the structure and properties for carbon graphite materials with oleic acid modified multi-walled carbon nanotubes