Abstract:Outstanding mechanical properties of graphene tend to deteriorate as its size increases as a consequence of agglomeration in metal matrix composites. In the present work, a post-process designing technique based on surface modification method is proposed which incorporates micro-level properties of graphene in order to realize its high theoretical strength and stiffness to improve mechanical properties of existing metal/alloy/metal matrix composite structures, hence enhancing their stiffness-to-weight ratio. The design utilizes laser surface texturing (LST) technique to fabricate micro-sized dimples on each surface and interface of plate structures. Graphene nanoplatelets (GNPs) are confined within these micro-dimples to form a graphene-based metal matrix composite. For numerical analysis under static loading and boundary conditions, two novel models are proposed, with different texture depths formed on each of five metal (Ti, Al, Cu, Ni and Mg) plate substrates. The elastic properties of both composite models have been modeled by employing Halpin–Tsai micromechanics framework. The linear 3D theory of elasticity is used as the basis of forming governing differential equations, and they are solved using scaled boundary finite element method (SBFEM). Stress and strain behaviors for all the models as well as substrate plates are discussed in detail, and obtained results in present study are consistent with already available analytical results. Furthermore, a remarkable enhancement in specific-stiffness is seen for proposed models as compared to the pure metal counterparts. The percentage decrement of maximum in-plane strain between pure Mg plate and Mg + GNPs (3.92 vol%) plate is 41.22%, and that between pure Ni plate and Ni + GNPs (3.92 vol%) plate is 7.40%. For both the models, about 97.94% of the top and bottom surface areas are covered with graphene making the composites highly corrosion resistant.

Microstructural investigation and performance of carbon matrix composites developed through facile pitch modification route

Fabrication And Characterization Of A New Pitch-Based Acnt/C Nanocomposites

Mechanical and thermal conduction properties of carbon/carbon composites with different carbon matrix microstructures

Microstructural design and mechanical performance of epoxy/carbon nanotube fiber composite

Improving carbon/carbon composites mechanical and thermal properties by the co‐carbonization of pre‐oxidized carbon fiber and pitch

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Microstructure and mechanical properties of carbon graphite composites reinforced by carbon nanofibers

Influence of Oxygen Uptake on Pitch Carbon Fiber

Investigation of graphene nanoplatelets-deposited textured metal matrix composite plates for improved mechanical properties: a numerical approach

Enhancing spinnability and properties of carbon fibers through modification of isotropic coal tar pitch precursor

Development and characterization of multiwalled carbon nanotube-reinforced microwave sintered hybrid aluminum metal matrix composites: An experimental investigation on mechanical and tribological performances

Influence of material and process parameters on microstructure evolution during the fabrication of carbon–carbon composites: a review

Modification of isotropic pitch by tailoring chemical structure and fraction contents for enhancing carbon fiber mechanical properties

Mesoscopic structure and properties of liquid crystalline mesophase pitch and its transformation into carbon fiber

Effect of Graphene Morphology on the Microstructure, Mechanical and Tribological Behavior of Nickel Matrix Composites

Enhanced interlaminar structure and dynamic mechanical properties of Tectona grandis fiber (TGF)/polypropylene fiber (PPF)/carbon nanotube (CNT) nano composite prepared solid dipping coating process

Preparation of in-situ grown carbon nanotubes via dithiocarbamate in composites with excellent microstructure and mechanical performance

Tribological, mechanical and microstructure characteristics of hybrid aluminium matrix composite containing titanium carbide (TiC) and graphite particles

Experimental Investigation and Analysis of Mechanical Properties of Chopped Strand Mat-E Glass Fiber Polyster Resin & Graphite Powder Composites

Physico‐mechanical, and thermal properties of sisal/hemp/Kevlar fibers, fly ash and Titanium Carbide nanoparticles reinforced bioepoxy composites

Improvement of the Electrical-Mechanical Performance of Epoxy/Graphite Composites Based on the Effects of Particle Size and Curing Conditions