Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

Kinetics of absorbing hydrogen of Al melt

Hydrogen desorption properties of the MgH2-AlH3 composites

An Investigation on the Reaction Mechanism of LiAlH4–MgH2 Hydrogen Storage System

Study of Hydrogen Absorption of Aluminum Melt

Influence of Anode Effect on Formation of Hydrogen in Electrolytic Aluminum Liquid

Experimental Study on the Effect of Low Melting Point Metal Additives on Hydrogen Production in the Aluminum–water Reaction

Improved Hydrogen Generation from the Hydrolysis of Aluminum Ball Milled with Hydride

Thermogravimetric Analysis of Hydrogen Production of Al–Mg–Li Particles and Water

Hydrogen Solubility in Molten TiAl Alloys

Effect of Salts Addition on the Hydrogen Generation of Al–LiH Composite Elaborated by Ball Milling

Hydrogen Absorption/desorption Properties of Li–Al–N–H Composite

Hydrogen Generation by Splitting Water with Al-Li Alloys

Hydriding Kinetics of Nano-Phase Composite Hydrogen Storage Alloys Prepared by Mechanical Alloying of Mg and MmNi5−x(CoAlMn)x

The Superior Hydrogen-Generation Performance of Multi-Component Al Alloys by the Hydrolysis Reaction

Effect of Hydrogen on Interfacial Reaction Between TiAl Alloy Melt and Graphite Mold

Structure of Liquid Aluminum and Hydrogen Absorption

Experimental Researches on Hydrogen Generation by Aluminum with Adding Lithium at High Temperature

Dynamic reaction process of Al-Mg-Li alloy with water at medium temperature

Dynamic Process of Hydrogen and Heat Generation from Reaction of Al–Li Alloy Powders and Water Vapor at Moderate Temperatures

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals

Establishment of Hydrogen Measurement System for Magnesium Alloy Melt