Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

Hydrogen Absorption of Slurry System Composed of Different MgNi Alloy and Benzene

Hydrogen Absorption Properties of a Slurry System Composed of a Magnesium Alloy Powder and C6H6

Hydrogen Absorption Properties of the Slurry System Composed of Liquid C6H6 and F-treated Mg2Ni

Study on Kinetics of Hydrogen Absorption by Metal Hydride Slurries I .absorption of Hydrogen by Hydrogen Storage Alloy MlNi5 Suspended in Benzene

Hydrogen Absorption Thermodynamic Properties of Rare Earth Based Hydrogen Storage Alloy in Benzene

Synergistic Effect of LiBH4and LiAlH4Additives on Improved Hydrogen Storage Properties of Unexpected High Capacity Magnesium Hydride

Surface Structure of F-treated La1.8Ca0.2Mg14Ni3La1.8Ca0.2Mg14Ni3 Alloy and Hydrogenation Properties of Solid–liquid System Composed of the Alloy and Benzene

Surface structure of F-treated La1.8 Ca0.2 Mg14 Ni3 alloy and hydrogenation properties of solid-liquid system composed of the alloy and benzene

Kinetics of Liquid-Phase Hydrogenation of Benzene in A Metal Hydride Slurry System Formed by Mlni(5) and Benzene

Hydrogen desorption properties of the MgH2-AlH3 composites

Kinetics of Liquid-Phase Hydrogenation of Benzene in a Metal Hydride Slurry System Formed by M1Ni5 and Benzene

An Investigation on the Reaction Mechanism of LiAlH4–MgH2 Hydrogen Storage System

In-situ Formation of Uniform Mg2Ni Catalyst and Hydrogen Storage Properties of Mg41Ni Alloys with Varied Grain Sizes and Morphologies

Dependence and Mechanism of Hydrogenation Behavior on Absorption Conditions in Hypo-Eutectic Mg–Ni–Cu Alloy

In-situ formation of uniform Mg 2 Ni catalyst and hydrogen storage properties of Mg 41Ni alloys with varied grain sizes and morphologies

Formation of AlNi Phase and Its Influence on Hydrogen Absorption Kinetics of Mg77Ni23-xAlx Alloys at Intermediate Temperatures

Improvement in the Hydrogen Storage Properties of MgH2 by Adding NaAlH4

In-situ Precipitation of Ultrafine Mg2Ni Particles in Mg-Ni-Ag Metal Fibers and Their Hydrogen Storage Properties

Sorption Properties of Mg-Ni-Crcl3 Hydrogen Storage Composite

Hydriding Characteristics of Mg2ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Hydriding Characteristics of Mg2NiMg2Ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis