Abstract:The effect of cold rolling and annealing on texture development and mechanical behavior of Zircaloy-4 alloy plates was systematically investigated in the present work. The as-received plates were subjected to cold rolling with thickness reductions of 33% and 66%. Electron back-scatter diffraction and tensile tests were performed to reveal the texture and mechanical properties, respectively. Results showed that a bimodal texture was featured in the as-received plate and the texture was a fiber that spread from <<math>101¯0</math>> to <<math>112¯0</math>>. After cold rolling and annealing, a fiber with a continuous distribution from <<math>101¯0</math>> to <<math>112¯0</math>> and a fiber with a maximum at the <<math>112¯0</math>> position were present in the plates with thickness reductions of 33% and 66%. Besides, the existence of {<math>0001</math>} basal fiber was noticed, indicating more basal poles oriented toward the normal direction. Tensile tests showed that the recrystallized plate with 66% thickness reduction was more ductile and less strong than that with 33% reduction. Meanwhile, tensile properties were sensitive to strain rate, loading direction and thickness reduction. Moreover, the relationship between texture development and yield strength was discussed based on Schmid theory. Calculated results indicated that prismatic <a> slip was the predominant deformation mode and its Schmid factor values under different loading directions contributed to the anisotropy of yield strength. Due to the texture development during cold rolling and annealing, the averaged SF values for prismatic <a> slip changed with the increased thickness reduction, resulting in the variation of yield strength.</a></a>

RECRYSTALLIZATION TEXTURE, CSL GRAIN BOUNDARY DISTRIBUTION AND CORROSION-RESISTING PROPERTY OF LY12 ALLOY

STUDIES ON RECRYSTALLIZATION TEXTURES AND GRAIN BOUNDARY CHARACTER DISTRIBUTION IN LY12 ALUMINUM ALLOY

Texture evolution of refill friction stir spot welding in alclad 2A12-T42 aluminum alloy

Anti-corrosion Performance of LY12 Al Alloy Reinforced by Anodic Oxidization and Silanization

Investigation on the primary and secondary recrystallization textures of rare earth micro-alloyed grain-oriented silicon steel

Recrystallization behavior and texture evolution during annealing of cryogenic-rolled 3003 aluminum alloy

Corrosion Behaviour of Ly12 Alloy under Thin Electrolyte Films

Texture development and mechanical behavior of Zircaloy-4 alloy plates fabricated by cold rolling and annealing

Effect of Evolution of Polycrystalline Textures on R-Value of Lf2 Aluminum Alloy

Influence Of Trace Re And Annealing On The Recrystallization Textures Of High Purity Al Anode Foils

Crystallization behavior and corrosion resistance of Al86Ni10Zr4 amorphous alloy under different annealing treatment conditions

Crystallization and Corrosion Resistance of As-Spun (al86ni9la5)98zr2 Amorphous Alloy

Static recrystallization and texture evolution of cold-rolled powder metallurgy CoCrFeNiN0.07 high-entropy alloy

Microstructure and Texture Evolution of Particle-Containing Aa3104 Alloy Cold Rolled to Large Strains

New insight of texture and microstructure evolution, and the connections between with tensile performance in as-annealed Al-Cu-Mg-Zr sheet

Corrosion of Ly12 Aluminum Alloy in Sodium Chloride Solution

Corrosion Morphology for LY12 Aluminum Alloy Friction Stir Welded in 3.5% NaCl Solution

Study on the Correlation between the Microstructure Characteristics and Corrosion Behaviors of 2A12-T4 Aluminum Alloy under Thermal Strain

Microstructure evolution and mechanical properties of Al-Cu-Li alloys with different rolling schedules and subsequent artificial ageing heat treatment

Microstructure and Texture Evolution of Cold Rolled 1070 Al Alloy During the Subsequent Annealing Treatment

Dislocation slips assisted grain rotation and specific texture evolution in a CoCrNi medium entropy alloy