Abstract:Cryogenic deep reactive ion etching (Cryo DRIE) of silicon has become an enticing but challenging process utilized in front-end fabrication for the semiconductor industry. This method, compared to the Bosch process, yields vertical etch profiles with smoother sidewalls not subjected to scalloping, which are desired for many microelectromechanical systems (MEMS) applications. Smoother sidewalls enhance electrical contact by ensuring more conformal and uniform sidewall coverage, thereby increasing the effective contact area without altering contact dimensions. The versatility of the Cryo DRIE process allows for customization of the etch profiles by adjusting key process parameters such as table temperature, O2 percentage of the total gas flow rate (O2 + SF6), RF bias power, and process pressure. In this work, we undertake a comprehensive study of the effects of Cryo DRIE process parameters on the trench profiles in the structures used to define cantilevers in MEMS devices. Experiments were performed with an Oxford PlasmaPro 100 Estrelas ICP-RIE system using positive photoresist SPR-955 as a mask material. Our findings demonstrate significant influences on the sidewall angle, etch rate, and trench shape due to these parameter modifications. Varying the table temperature between -80°C and -120°C under a constant process pressure of 10 mTorr changes the etch rate from 3 to 4 μm/min, while sidewall angle changes by ~2°, from positive ( 90° relative to the Si surface) tapering. Altering the O2 flow rate with constant SF6 flow results in a notable 10° shift in sidewall tapering. Furthermore, SPR-955 photoresist masks provide selectivity of 46:1 with respect to Si and facilitates the fabrication of MEMS devices with precise dimension control ranging from 1 to 100 μm for etching depths up to 42 μm using Cryo DRIE. Understanding the influence of each parameter is crucial for optimizing MEMS device fabrication.

Reactive Ion Etching of Cvd Diamond Films for Mems Applications

Micromachining of CVD diamond by RIE for MEMS applications

Patterning of Diamond Films by Rie and Its Mems Applications

Precise Patterning of Diamond Films for MEMS Application

Diamond etching with near-zero micromasking

Deep Reactive Ion Etching of Z-Cut Alpha Quartz for MEMS Resonant Devices Fabrication

Fabrication of Diamond Microstructures by Using Dry and Wet Etching Methods

The Study on Mask Technology of Cvd Diamond Thin Films by Rie Etching

CVD Diamond Microhinge for MOEMS Applications

Nano- and micro-crystalline diamond film structuring with electron beam lithography mask

Crystallographic Orientation Dependent Reactive Ion Etching in Single Crystal Diamond

Defined Etching Of Carbon-Diamond Films On Silicon Using An Oxygen Plasma With Titanium Masking

Crystallographic Orientation Dependent Reactive Ion Etch in Single Crystal Diamond

Diamond Membrane Production: The Critical Role of Radicals in the Non-Contact Electrochemical Etching of sp2 Carbon

High-precision and high-speed etching of diamond surfaces using Fe–Ni alloy catalyzed H–O plasma etching

Microcontact printing fabrication of diamond MEMS cantilevers on silicon substrate

Enhanced etch rate of deep-UV laser induced etching of diamond in low pressure conditions

Patterning of diamond with 10 nm resolution by electron-beam-induced etching

Improvement of Adhesive Strength and Surface Roughness of Diamond-Coated Thin Film Tools

Cryogenic DRIE Processes for High-Precision Silicon Etching in MEMS Applications

Micro- to Nano-Scale Topographical Etching of Diamond Substrate Via Anisotropically Atomic Removal