Abstract:Purpose The purpose of this study is to analyze the influence of high-temperature inlet oil on the comprehensive performance of tilting-pad bearing. Design/methodology/approach Taking a tilting-pad bearing under high temperature of inlet oil in a natural gas compressor as an example, the experimental system was developed for the tilting-pad bearing applied in a real machine, and the experiment was performed. The bearing lubricating properties under different high temperatures of inlet oil were obtained, including oil film thickness on the pivot, temperature rise and the shaft vibration values at the bearing positions. Findings The experimental results showed that the vibration, the oil film thickness on the pivot and the pad temperature were not sensitive to the change in temperature of the inlet oil, but vibrations were observed under the specific speed. At the same speed, when oil temperature changed by 1°C, the bearing temperature rise did not exceed 0.2°C and change in oil film thickness on the pivot was 1 µm. The test results of the actual unit are in good agreement with the experimental results. Originality/value The vibration measurement scheme was presented, and an indirect measurement method of fulcrum thickness was proposed. The practicability of the measurement method and the accuracy of test results were verified by the comparison of the test results of the shaft vibration, the bearing pad temperature, the fulcrum oil film thickness and the theoretical calculation results. This study will provide an important reference for designing a tilting-pad bearing with high-temperature inlet oil.

Experimental Study of the Start-up Transient Thermal Effects on Tilting-Pad Thrust Bearings

An Experimental Study of the Transient Thermal Effect of Tilt ing-pad Thrust Bearings in Operation Process with Sudden Variation of Load

Experimental Study of the Transient Thermal Effect and the Oil Film Thickness of the Equalizing Thrust Bearing in the Process of Start-Stop with Load

Transient Thermo-Elasto-hydrodynamic Analysis of a Bidirectional Thrust Bearing in Start-Up and Shutdown Processes

Study on adiabatic transient behavior of tilting-pad journal bearing

Theoretical and Experimental Study of Transient Behavior of Spiral-Groove Thrust Bearings During Start-Up

Asymmetry Characteristic of Tilting-Pad Thrust Bearing During the Start-Up and Shut-Down Process

Transient mixed thermal elastohydrodynamic lubrication analysis of aero ball bearing under non-steady state conditions

Influence of squeezing and interface slippage on the performance of water-lubricated tilting-pad thrust bearing during start-up and shutdown

Effects of Initial Conditions and Impact Load on Transient Lubrication Behavior of Journal Bearings

Transient Tribodynamic Analysis of Crankshaft-Main Bearing System During Engines Starting Up

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Transient TEHD Analysis of a Thrust Bearing Based on Two-Way Fluid-Solid-Thermal Interaction

The Study on Static Attribute of Tilting Pad Thrust Bearing with Thermal Elasto Hydrodynamic Lubrication under Steady Load

Numerical simulations for the fluid-thermal-structural interaction lubrication in a tilting pad thrust bearing

Theoretical and Experimental Study on the Static and Dynamic Characteristics of Tilting-Pad Thrust Bearing

Experimental Research on the Tilting Pad Bearing under the High Temperature of Inlet Oil

Transient Thermal Thermal Elastohydrodynamic Lubrication Performance of Multi-tilting-pad Journal Bearing

Experimental Study on Pad Temperature and Film Thickness of Tilting-Pad Journal Bearings with an Elastic-Pivot Pad

Modelling and theoretical research on transient lubrication and wear coupling behavior of main bearing during start-up of low-speed diesel engine

Transient Lubrication Performance of Tilting-Pad Journal Bearings under Dynamic Load Considering Bi-Directional Misalignment and Mixing Temperature Behavior