Abstract:This work managed the extrusion strain path by designing various extrusion die cavities, successfully realizing the texture modification for the ZK60 magnesium alloy. The mechanisms involving the texture dependence on the extrusion die cavity as well as their effects on the mechanical properties were emphatically investigated. Results showed that dynamic recrystallization refined the grain size and improved the microstructure homogeneity in the three extrusion specimens, but did not produce too large microstructure differences. By comparison, significant texture differences developed owing to the various extrusion die cavities, which here were mainly reflected in the strong or weak texture components for the c-axes//TD and the c-axes//ND. Such texture differences started from the deformation texture instead of the recrystallization texture whose roles only consisted in dispersing the texture component and reducing the texture intensity. The results from the finite element analysis and the visco-plastic self-consistent model indicated that, in order to accommodate the different strain components induced by the extrusion die cavities, slip systems or tension twinning were activated differently, and this was the critical reason causing the above texture differences. One modified Hall-Petch relationship was adopted to analyze the conjoint effects of grain refinement and texture variation on the yield stress. Additionally, the quantitative results about deformation mechanism activation fractions demonstrated that the texture variations influenced the competition relationships between the twinning induced deformation and the slip dominant deformation, and the former generally produced the lower yield stress and the increasing stage of strain hardening rate, while the latter produced the higher yield stress and the continuous decline of strain hardening rate.

Strain analysis of lateral extrusion process

Tensile and Compressive Deformation Behaviors of Commercially Pure Al Processed by Equal-Channel Angular Pressing with Different Dies

Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

The central strain analytical modeling and analysis for the plate rolling process

Simulation and Experiment Analysis of Dual-directional Extrusion of AZ31 Mg Alloy

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

Fine analysis of section stress of steel strand

Energy analysis of the extrusion process through a streamlined Gaussian die

FE Simulation of Extrusion to Produce a Thin-Walled Wide Profile Through a Spreading Pocket Die

Computational analysis of yield stress buildup and stability of deposited layers in material extrusion additive manufacturing

Finite Element Simulation of Extrusion Process of TC4 Titanium Alloy Profile

Effect of equal channel angular extrusion process on deformation behaviors of Mg-3Al-Zn alloy

Towards understanding the microstructure and temperature rule in large strain extrusion machining

Finite Element Analysis of Thermal Stress and Thermal Deformation in Typical Part during SLM

Numerical simulation of the residual stress in the Mg-5Zn-3.5Sn-1Mn-0.5Ca-0.5Cu alloy with different extrusion parameters

Numerical Simulation of 6061 Aluminum Alloys during the Semi-Solid Backward Extrusion

Multiscale Mechanical Behavior and Microstructure Evolution of Extruded Magnesium Alloy Sheets: Experimental and Crystal Plasticity Analysis

Effects of extrusion die cavity on the texture components and the associated mechanical properties for ZK60 magnesium alloy

New Formulas of Shear Strain During Equal-channel Angular Pressing Process with Consideration of Influences of Velocity and Motion Trajectory

Multiscale Analysis And Numerical Modeling Of The Portevin-Le Chatelier Effect