Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

PULSE PROPAGATION MODEL OF TURBINE GENERATOR STATOR WINDINGS

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Coupled field finite element analysis for turbine generator under loss-of-excitation asynchronous operation

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

3D finite element study of transient electromagnetic forces acting on the stator end-windings of a large turbo-generator

Experimental study of the pulse propagation in turbine generator stator windings

Control Integrated Studies on High Speed Permanent Magnetic Generators System

Modeling Principle and Parameter Identification of Double Fed Wind Turbine for Electromechanical Transient Simulation of Power System

MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

Design Aspects for Permanent Magnet Superconducting Wind Power Generators

The dynamic performance and temperature distribution of turbine generator under loss of excitation by using coupled FE analysis

Computation of transient electromagnetic torque in a turbogenerator under the cases of different sudden short circuits

Modal Analysis of the 1200 MW Turbo-generator Stator End Windings

Improved Transient Simulation Of Salient-Pole Synchronous Generators With Internal And Ground Faults In The Stator Winding

Transient-state characteristics of synchronous generators with AC and DC stator connections

Simplified Mathematical Model of Inter-Turn Short Circuit of Field Windings in Hydro-Generators and Its Application

Winding Function Model of Stand-Alone Synchronous Turbo-Generator With Damper Winding

Ac Loss Analysis on an Hts Field Winding of the Generator with T-A Formulation

Heat transfer coefficient distribution in inner surface of stator ventilation duct for large capacity air-cooled turbine generator

Comprehensive simulation for faults in the stator windings of salient-pole synchronous generators

Influence of Stator Structure on Electromagnetic Performance of High Speed PM Generator