Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The present research aims to investigate the influence of and the relationship between welding speed (v), focal position (FP), and laser power (LP) as input parameters for fiber laser to weld P91 under pure argon and CO2 shielding atmospheres using response surface methodology and using the desirability approach; optimization of input parameters has been performed to maximize the depth of penetration (DP) while minimizing the top bead width (TW) and heat-affected zone width (HW). The results indicate that laser power (LP) has the most significant impact on depth of penetration (DP), whereas welding speed (v) affects top bead width (TW) and heat-affected zone width (HW). The optimal combination of parameters under argon shielding results in a significantly low heat input of 48 J/mm (0.048 kJ/mm) and 50 J/mm (0.050 kJ/mm) pure argon and CO2 shielding atmospheres, respectively. Despite the difference in heat input being only 4.08%, an 11.618% increase in DP is observed under the CO2 shielding atmosphere. Due to the high-speed nature of the welding process (argon: 82.65 mm/s and CO2: 79.283 mm/s) combined with the significant reduction in heat input, the heat-affected zone is limited to a mere width of 0.203 mm under an argon shielding atmosphere and 0.263 mm under the CO2 shielding atmosphere compared with that reported in the other welding processes without the dissolution of precipitates in the fusion boundary of heat-affected zone. Microstructural characterization of the fusion zone has revealed the presence of an untempered lath martensite structure with precipitate dissolution. The precipitate dissolution has resulted in grain coarsening of 47.76% in argon weld and 39.65% in CO2 weld compared with the base metal grain size of 6.07 μm.

Experimental investigation on the plasma shielding during high power CO2 laser welding of steel

Study on Side Assist Blowing Gas with Different Composition in High Power CO_2 Laser Welding

Effect of Shielding Gas on the Plasma Plume in Pulsed Laser Welding

Experimental and Numerical Investigation of Shielding Gas Behaviors in Laser Welding of TC4 Alloy

Effect of Shielding Gas on Surface Formation During Laser Welding of Al-Si Coated Press-Hardened Steels

Active control effect of shielding gas flow on high-power fiber laser welding plume

Investigating the Influence Mechanism of Different Shielding Gas Types on Arc Characteristics and Weld Quality in TA2 Laser–Arc Hybrid Welding

Analyzing the effect of different shielding atmospheres on fiber laser welding parameters for modified 9Cr-1Mo steel

Effects of He-Ar shielding gas compositions on arc plasma physical properties in rotating laser + GMAW hybrid fillet welding: Numerical simulation

The Behavior and Its Control of Plasma Produced During Laser Welding

Research progress of laser welding under subatmospheric pressure

Effect of Focusing Condition on Laser Energy Absorption Characteristics in Pulsed Laser Welding

Effect of shielding gas on MIG welding performance with austenitic wire

Effect of Shielding Conditions on Welding Properties in Underwater Local-Dry Laser Welding

Influence of CO2 laser welding process on weld surface formation of wrought magnesium alloy AZ31B

Analysis of dynamic plasma behaviors in gas metal arc welding by imaging spectroscopy

Microstructure and Mechanical Properties of a Weld Seam from Magnetron High-Current CO2 Welding

Understanding the Effect of Oxygen on Weld Pool and Keyhole in Laser Beam Welding

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Effects of Ar-N 2 -He shielding gas on microstructure, mechanical properties and corrosion resistance of the Laser-MIG additive manufacturing 316L stainless steel