Abstract:The laser welding（LW） process of highly reflective materials presents low thermal efficiency and poor stability. To solve the problem,the effects of subatmospheric environment on LW process, technological parameters in subatmospheric environment on weld formation and welding with sinusoidal modulation of laser power on the stability of LW process in subatmospheric environment were explored. The AZ31magnesium（Mg） alloy was used as the test materials. The test result revealed that the weld penetration in subatmospheric environment can increase by more than ten times compared with that under normal pressure. After the keyhole depth greatly rises, significantly periodic local bulge is observed on the backwall surface of the keyhole and the position of the bulge shifts along the direction of the keyhole depth.Eventually, the hump-shaped surface morphology of the welded seam is formed; moreover, the weld width in local zones in the lower part of the welded seam remarkably grows. During LW in subatmospheric environment, the weld penetration can be further greatly increased through power modulation. Besides, power modulation can inhibit the occurrence of bulges in local zones on the backwall of the keyhole during LW in subatmospheric environment, thus further curbing the significant growth of the weld widths of hump-shaped welding beads and local zones in the lower part of welded seams. Finally, the mechanism of synchronously improving the thermal efficiency and stability of LW process of highly reflective materials through power modulation in subatmospheric environment was illustrated. This was conducted according to theoretical analysis of recoil pressure and observation results of dynamic behaviors of laser induced plasma clouds and keyholes in the molten pool through high speed photography.

Research progress of laser welding under subatmospheric pressure

Review of Laser Welding Under Subatmospheric Pressure

Study on the Effect of Laser-Induced Plasma Plume on Penetration in Fiber Laser Welding under Subatmospheric Pressure

Effect of Ambient Pressure on Interaction Between Laser Radiation and Plasma Plume in Fiber Laser Welding

Bead Formation Characteristics in Laser Welding of High-Strength Steel under Subatmospheric Pressures

Research Progress of Laser Welding Process Dynamic Monitoring Technology Based on Plasma Characteristics Signal

Research on plasma in high power carbon dioxide laser welding of ship plate

Dynamic Coupling Between Molten Pool and Metallic Vapor Ejection for Fiber Laser Welding under Subatmospheric Pressure

Comparison of Processing Window in Full Penetration Laser Welding of Thick High-Strength Steel under Atmosphere and Sub-Atmosphere

Spatial distribution characteristics of plasma plume on attenuation of laser radiation under subatmospheric pressure.

Characteristics of Bead Formation and Plasma Plume in Fiber Laser Welding Under Vacuum

Influence of Environmental Pressure on the Energy Coupling and Droplet Transition Behavior in Laser Welding with Filler Wire

An analysis of Plasma Phenomena and Influencing Factors of Plasma in High Power Laser Welding

A Comparative Study on Welding Characteristics and Mechanical Properties of Ti–6Al–4V Laser Welded Joints under the Sub-Atmospheric Pressure and Beam Oscillation

3D Transient Multiphase Model for Keyhole, Vapor Plume, and Weld Pool Dynamics in Laser Welding Including the Ambient Pressure Effect

Influence of pressures in a hyperbaric environment on the penetration during pulsed laser welding of 304 stainless steels and its influence mechanism

The effect of beam oscillation on laser welding of AA2219-T87 under subatmospheric pressure

Effect of ambient pressure on laser welding of AlSi10Mg fabricated by selected laser melting

Laser Welding under Vacuum: A Review

Improving Thermal Efficiency and Stability of Laser Welding Process for Magnesium Alloy by Combining Power Modulation and Subatmospheric Pressure Environment

Progress in High Brightness Solid-state Laser Welding