Abstract:In the context of global warming and energy shortage, the key means to increase product competitiveness is how to achieve lightweight manufacturing of large spacecraft skin-stringer structures by welding instead of riveting. In this work, we propose dual-laser beam oscillating bilateral synchronous welding (DLBOW) by combining dual-laser beam synchronous welding (DLBW) with the oscillating process to overcome the long-standing porosity problem in T-joint welds and investigate the effect of different laser incidence angles on the porosity of the weld during welding. At the same time, the corresponding numerical model was established by computational fluid dynamics to analyze the molten pool flow behavior and keyhole evolution under molten pool coupling. This is the first time that complete wire melting process has been achieved in the T-joint dual-laser beam synchronous welding numerical model, reproducing more realistically the influence of the wire fusion behavior on the molten pool flow. Both experimental and simulation results show that the porosity is significantly reduced under DLBOW compared to DLBW; in addition, the porosity is lower when the laser incidence angle is smaller. An in-depth analysis of the numerical model reveals the mechanism of this physical phenomenon: First, the oscillation process optimizes the laser energy density distribution and reduces the peak temperature of the T-joint molten pool. The impact of the metal flow on the keyhole is weakened, which reduces the probability of bubble formation and thus significantly decreases the porosity. Moreover, for the oscillation process, the keyhole effect is more obvious at large laser incidence angles, and the actual heat input to the molten pool is larger, which makes the slender keyhole more prone to collapse and more likely to generate pores. This work provides new insight into the interrelationship between keyhole and pore in T-joint dual-laser beam synchronous welding.

Suppression Mechanism of Collapse Defects and Microstructural Evolution During Full-Penetration Laser Welding Assisted by the Following Bottom Airflow

Investigation on the Formation Mechanism of Collapse Defects, Microstructural Evolution and Mechanical Properties in Full Penetration Laser Welding of Thick-Section Steel

Effects of Solidification on Flow Dynamics: A Novel Comprehension of Defects Formation in Laser Penetration Welding

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys

Dynamic Behavior of Molten Pool Backside During Full-Penetration Laser Welding of Ni-based Superalloys

Effect of collapse and hump on thermomechanical behavior in high-power laser welding of 16-mm marine steel EH40

Enhanced Penetration Depth during Reduced Pressure Keyhole-Mode Laser Welding

Investigation of Weld Root Defects in High-Power Full-Penetration Laser Welding of High-Strength Steel

Humping Formation and Suppression in High-Speed Laser Welding

Influencing of Molten Pool Dynamic Behavior on the Weld Formation during the Laser‐Arc Hybrid Welding of 12 mm Thick Steel

Understanding the Effect of Oxygen on Weld Pool and Keyhole in Laser Beam Welding

Simulation Study on Weld Formation in Full Penetration Laser + MIG Hybrid Welding of Copper Alloy

Research progress of laser welding under subatmospheric pressure

Mitigation of porosity in adjustable-ring-mode laser welding of medium-thick aluminum alloy

Research on the dynamic process and defect formation in laser-arc hybrid welding of 12-mm thick AH36 steel

Numerical simulation on pore formation and suppression for dual-beam laser welding of sandwich structure

Understanding root humping in high-power laser welding of stainless steels: a combination approach

Welding stability and fatigue performance of laser welded low alloy high strength steel with 20 mm thickness

Numerical simulation of molten pool flow behavior and keyhole evolution behavior in dual-laser beam oscillating bilateral synchronous welding of T-joints

Toward Stabilizing the Keyhole in Laser Spot Welding of Aluminum: Numerical Analysis