Abstract:The poly-electrolyte cation functional group of 2,3-ionene was synthesized with tetramethyl ethylenediamine and 1,3-dibromopropane as the raw materials. Multiporous polystyrene-divinylbenzene microsphere particles (PS-DVB) were produced by swelling method with polystyrene as seeds and sulfonated. Then the 2,3-ionene was bonded on the sulfonated multi-porous polystyrene-divinylbenzene microsphere particles by agglomeration to get the agglomerative ion-exchange stationary phase. After optimizing the synthetic conditions, the new stationary phase was characterized by the techniques including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and elemental analysis. The chromatographic column was packed by slurry method and applied in the analysis of SO4(2-) with a conductivity detector. SO4(2-) and other six common anions including F-, Cl-, NO2(-), Br-, NO3(-), PO4(3-), were separated and analyzed rapidly on the self-regulating chromatographic column within 8 min. The linear range was from 0.5 to 50 mg/L with correlation coefficient (r) of 0.9992. The LOD was 0.04 mg/L with S/N of 3. The relative standard deviations (RSDs, n = 6) were 2.4% and 3.1% for the peak area and retention time, respectively. The recoveries were between 99.2% and 101.8%. The retention times of SO4(2-) did not change significantly after long time use of the self-regulating chromatographic column. The self-regulating chromatographic column is suitable for the detection of SO4(2-) in complex matrix samples.

Determination of Sulphur Trioxide in Extracted Phosphoric Acid by Flow Injection-Enthalpimetry

Determination of sulphur trioxide in extracted phosphoric acid by injection enthalpimetric method

Determination of Passive-Sampled Sulphur Dioxide in Ambient Air As Sulphate Ion by Flow Injection Analysis with an In-Line Reaction Column.

Determination of Sulfur Dioxide in Southeast Asia by Flow Injection Analysis with on-line Reaction Column.

Flow injection determination of gaseous sulfur dioxide with gas permeation denuder-based online sampling and preconcentration

Determination of Hydrogen Peroxide Using Flow Injection Analysis-Conductivity Method with Ion Chromatography

Determination of antimony(III) and antimony(V) in natural waters at ultratrace levels by flow injection on-line sorption preconcentration coupled with hydride generation atomic fluorescence spectrometry

Determination Of Total Phosphorus In Waters Using Flow Injection Analysis

Sulfide Measurement by Flow Injection Analysis with Flame Photometric Detection

Determination of Iron( II ) and Total Iron Using Flow Injection On-line Preconcentration with FAAS

[Determination of Sulfur Dioxide by Fluorometric Analysis].

Measurement of Trace Amount of Cl~- and SO_4~(2-) in Industrial Grade Phosphorous Acid of Hazardous Chemical Substance

Flow Injection On-line Photochemically Spectrofluorimetric Determination of Folic Acid in Pharmaceutical Preparations

Determination of Menadione Sodium Bisulfite in Pharmaceutical Preparations by Flow-Injection On-line Photochemical Spectrofluorometry

Two-step Solvent Extraction Flow Injection System for the Determination of Anionic Surfactants by Spectrophotometry

Indirect Determination Of Sulfate At Trace Levels In Waters By Flow Injection On-Line Sorption In A Knotted Reactor Coupled With Hydride Generation Atomic Fluorescence Spectrometry

Determination of Total Phosphorus in Water Samples by Flow-Injection Analysis

Simultaneous determination of NaOH, Na2CO3 and Al2O3 in sodium aluminate solutions by flow injection titration

Determination of sulfite in food by flow injection analysis.

[Preparation of an Agglomerated Ion Chromatographic Stationary Phase with 2,3-Ionene and Its Application in SO4(2-) Analysis].

Determination Of Trace Amounts Of Sulfide By Flow-Injection Chemiluminescence Method