Abstract:In this paper, a fully software-controlled multisyringe flow injection (MSFIA) spectrophotometric system is proposed for the determination of sulfide in environmental and waste waters. The implementation of ancillary solenoid valves into the flow network allows a multitude of injection modalities to be explored, the selected modality being directly dependent on the aim of the assays. The multicommuted sandwich-type approach is introduced in this work as an efficient means to warrant high sensitivity for the particular assay with excellent repeatabilities and a considerable reagent saving. Moreover, a high injection frequency may be easily attained by carrying out a multiple injection modality during a single forward displacement of the piston driver bar. The interfacing of the robust and versatile multisyringe piston pump with an optical fiber plug-in spectrophotometer furnished with a light emitting diode enables the miniaturization of the flow analyzer, which is thus readily adaptable to in-situ and real-time monitoring schemes. The flow method is based on the coupling Fischer's reaction of sulfide with N,N-dimethyl-p-phenylenediamine in the presence of Fe(III) as oxidizing reagent in a 0.7M HCl medium. Careful selection of the physical and chemical variables enabled coefficients of variations better than 1.5% (n = 10) at the 1mgl(-1) level for both injection modalities. Dynamic working ranges of 0.2-2.0 and 0.5-5mgl(-1) sulfide for sandwich and multiple injection techniques, and detection limits of 0.09 and 0.15mgl(-1), respectively, were obtained. Furthermore, the sandwich modality featured an average slope of 0.43 +/- 0.02lmg(-1) calculated from 10 day-to-day calibration plots. This result reveals better sensitivity than other flowing stream methods described in the literature. The multiple injection technique allowed an improvement of the injection throughput up to 80h(-1), although a decrease of sensitivity was concomitantly observed (average slope of 0.17 +/- 0.01lmg(-1)). The multisyringe flow method was successfully applied to the determination of sulfide in different spiked water matrices (namely, mineral, tap, freshwater, seawater and wastewater) with recoveries ranging from 96 to 104%. Good agreement was also found in water samples between the MSFIA results and those of the batch APHA-standard method.

Two-step Solvent Extraction Flow Injection System for the Determination of Anionic Surfactants by Spectrophotometry

Laboratory Evaluation of the Use of Solvent Extraction for Separation of Hydrophobic Organic Contaminants from Surfactant Solutions During Surfactant-Enhanced Aquifer Remediation

Aqueous Two-Phase Extraction System of Sodium Perfluorooctanoate and Dodecyltriethylammonium Bromide Mixture and Its Application to Porphyrins and Dyes

Determination of carbaryl and its metabolite 1-naphthol in water samples by fluorescence spectrophotometer after anionic surfactant micelle-mediated extraction with sodium dodecylsulfate.

Flow injection determination of cationic surfactants by using N-bromosuccinimide and N-chlorosuccinimide as new oxidizing agents for luminol chemiluminescence

Aqueous two-phase system of cationic and anionic surfactant mixture and its application to the extraction of porphyrins and metalloporphyrins

Studies of micelle and trace non-polar organic solvent on a new chemiluminescence system and its application to flow injection analysis

Separation of Amino Acids by Aqueous Surfactants Two-Phase Extraction

Microfluidic Liquid-Liquid Extraction System Based on Stopped-Flow Technique and Liquid Core Waveguide Capillary

Determination of Menadione Sodium Bisulfite in Pharmaceutical Preparations by Flow-Injection On-line Photochemical Spectrofluorometry

Detection of the critical micelle concentration of cationic and anionic surfactants based on aggregation-induced emission property of hexaphenylsilole derivatives

Hexafluoroisopropanol-induced coacervation in aqueous mixed systems of cationic and anionic surfactants for the extraction of sulfonamides in water samples

Analysis Of Sulfonic Acids Anionic Surfactant By Gas Chromatography/Mass Spectrometry

Automated Continuous Monitoring of Drug Dissolution Process Using a Flow Injection On-Line Dialysis Sampling – Solvent Extraction Separation Spectrophotometric System

Simultaneous Determination of Cationic and Anionic Surfactants in Environmental Water Samples by Ion-Pair Liquid Chromatography/Mass Spectrometry

An unsegmented extraction system for flow injection analysis

A multisyringe flow injection method for the automated determination of sulfide in waters using a miniaturised optical fiber spectrophotometer

Determination of Solubility of Sodium Salts in Aqueous Surfactant and STPP Solutions Using an Ion Selective Electrode

Aqueous Two-Phase Systems Based on Cationic and Anionic Surfactants Mixture for Rapid Extraction and Colorimetric Determination of Synthetic Food Dyes

New aqueous two-phase system formed by piperazinium-based surface-active ionic liquid for extraction of dyes

Flow-injection chemiluminescence method for determination of critical micelle concentration of surfactants