Abstract:Ethylbenzene catalytic dehydrogenation can generate a large amount of hydrogen. Its vent gas is attractive with hydrogen content higher than 75 mol%. Nevertheless, styrene remaining in the vent gas is highly active to polymerize into oligomers, the gradual accumulation of which is harmful to hydrogen separation equipments. In this work, an integral separation process including absorption and membrane units is established to overcome this challenge. Absorption unit running with fresh ethylbenzene as the absorbent is proposed to deeply remove styrene, the residual content of which is reduced to less than 10 ppm. Thereafter, the generation and accumulation of styrene oligomers is restrained strictly to protect hydrogen separation equipments. Furthermore, the custom-designed absorption tower with a multi-stage cycle structure is used to reasonably improve styrene content in the used ethylbenzene at tower bottom, in the interest of reducing styrene recovery expense. For a 100 kt/a styrene plant with the vent gas flow rate up to 3180 N m(3)/h, a 5 stage tower is designed, which is 0.5 m in diameter, 5.0 m in height, and about 3.0 m in the total packing height of 25-mm metal Intalox saddles. Flow rates of liquids in the tower and the recycle routes are 1.19 m(3)/h and 1.05 m(3)/h, respectively. Finally, compressor and membrane for hydrogen recovery are optimized simultaneously with gross profit as the criterion. For compressor, its duty and outlet pressure are 520 kW and 1.85 MPa, respectively. For membrane separation unit, its area and permeation stage cut are 460 m(2) and 0.84, respectively. According to the simulation research, this integrated system can behave excellently with an annual recovery of 162 ton styrene, 281 ton aromatic hydrocarbons and 2.1 x 10(7) N m(3) hydrogen, with a gross profit up to 5.1 x 10(6) US dollars per year. (C) 2016 Elsevier B.V. All rights reserved.

Experimental study on porous membrane reactor for dehydrogenation of ethylbenzene

Catalytic Dehydrogenation of Ethanol in A Metal-Modified Alumina Membrane Reactor

Highly efficient and stable hydrogen permeable membrane reactor for propane dehydrogenation

Fluidized Bed Membrane Reactor for the Direct Dehydrogenation of Propane: Proof of Concept

Catalytic Dehydrogenation of Ethanol in Ru-Modified Alumina Membrane Reactor

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Catalytic dehydrogenation of ethanol in PdM / 7-A 1203 composite membrane reactors

Novel Packed Bed Reactor Designed for Prileschajew Epoxidation of Fatty Acid Methyl Ester: Intensification of Mass/heat Transfer

Catalytic Dehydrogenation of Ethanol in PdM/γ-Al2O3 Composite Membrane Reactors

Protocol for preparation of electrifiable carbon membrane reactor for non-oxidative alkane dehydrogenation

Formaldehyde production by catalytic dehydrogenation of methanol in inorganic membrane reactors

Gas to Liquids: Natural Gas Conversion to Aromatic Fuels and Chemicals in A Hydrogen-Permeable Ceramic Hollow Fiber Membrane Reactor

Effective Reclamation of Vent Gas in Ethylbenzene Dehydrogenation by Coupling Multi-Stage Circle Absorption and Membrane Units

Hydrogen-permeable DDR zeolite membrane packed with Zn/HZSM-5 catalyst for methane co-aromatization with ethylene

Development of nanostructured catalytic membranes for partial benzene hydrogenation to cyclohexene

Ethylbenzene dehydrogenation over Fe2O3 promoted TiO2-ZrO2 catalysts and corresponding conceptual fluidized bed process

Promoting the dehydrogenation of light alkanes with a carbon-based membrane reactor

Ethylene and cyclohexane co-production in the fixed-bed catalytic membrane reactor: Experimental study and modeling optimization

Continuous Oxygen Ion Transfer Medium As a Catalyst for High Selective Oxidative Dehydrogenation of Ethane

Development and Intensification of the Ethylene Process Utilizing a Catalytic Membrane Reactor

STUDY ON CATALYTIC HYDROGENATION OF METHYL BENZOATE TO BENZALDEHYDE