Abstract:Propylene serves as one of the most significant compounds in the chemical industry. Propane dehydrogenation (PDH), an “on purpose” propylene production technology is developing. Pt- and CrO x -based catalysts are widely applied in commercialized PDH processes, and both exhibit high activity and propylene yields. However, as an intensively endothermic process, PDH requires operation at high temperatures (generally above 500 °C), which restricts the C3H6 selectivity and catalyst structure stability on account of coking side reactions, particle sintering, and so forth. Nanostructured catalysts (NCs) based on metals and/or metal oxides with tunable geometric and electronic properties play significant roles because such features intrinsically influence the adsorption of propyl intermediates on the catalyst surface. However, thermodynamical metastability of these NCs results in grand challenges in their structure-controlled preparation. The regulation of material structure and reaction performance at the molecular and atomic levels has attracted extended attention over the past few years. This Account describes our recent advances in controllable regulation of metal and oxide NCs toward efficient propane dehydrogenation. As a structure-insensitive reaction, the dehydrogenation of propane can occur on an individual active site, while larger ensembles of active sites also induce structure-sensitive side reactions, leading to C–C cracking and coke deposition. This paper is aimed at delivering general fundamentals for rational design of NCs in PDH reactions. We start with the catalytic kinetics on the active sites regarding the adsorption of key propyl intermediates on the surface. In subsequent sections, we present the effective regulation strategies for metal and oxide NCs by promoter and support effects. Upon metal NCs, coke deposition and nanoparticles (NPs) sintering tend to occur, which can be suppressed with the increase of geometric separation and charge density of surface active sites by changing alloy compositions, ordered intermetallic alloys, single-atom catalysts, core–shell, and metal–oxide interface structures. Notably, the confinement approach of embedding active sites in zeolite frameworks significantly inhibits the sintering of metal NPs. As alternatives to metals, metal oxides exhibit lower cost but higher barriers of C–H activation and coking inclination. The C–H bond cleavage has been promoted by inducing intrinsic defect sites, such as oxygen vacancies, hydroxyls, and hydrides on the surface and heterogeneous doping in the bulk. Importantly, the structures of the submonolayer/monolayer triggered by spontaneous dispersion and confinement in mesoporous materials significantly improve the oxide activity and stability. All of these strategies have been essential for the efficient PDH reactions. Moreover, the challenges and perspectives are also discussed. It is hoped that the deliberate manipulation of nanostructured catalysts to regulate the reaction mechanism will hold the key to efficient alkane conversion.

Highly efficient and stable hydrogen permeable membrane reactor for propane dehydrogenation

Fluidized Bed Membrane Reactor for the Direct Dehydrogenation of Propane: Proof of Concept

Study of Propane Dehydrogenation to Propylene in an Integrated Fluidized Bed Reactor Using Pt-Sn/Al-SAPO-34 Novel Catalyst

Overcoming limitations in propanedehydrogenation by codesigning catalyst-membrane systems

A mid/low-temperature solar-driven integrated membrane reactor for the dehydrogenation of propane – A thermodynamic assessment

Oxidative dehydrogenation of propane in a dense tubular membrane reactor

SAPO-34 Supported Pt–Sn-based Novel Catalyst for Propane Dehydrogenation to Propylene

Low-temperature CO2 hydrogenation overcoming equilibrium limitations with polyimide hollow fiber membrane reactor

Modeling the Selectivity of Hydrotalcite-Based Catalyst in the Propane Dehydrogenation Reaction

Recent Progress in Metal-Molecular Sieve Catalysts for Propane Dehydrogenation

Carbon Molecular Sieve Membrane Reactors for Ammonia Cracking

Hydrothermal Study of Pt–Sn-based SAPO-34 Supported Novel Catalyst Used for Selective Propane Dehydrogenation to Propylene

Nanostructured Catalysts toward Efficient Propane Dehydrogenation

Propane Dehydrogenation on Single-Site [PtZn4] Intermetallic Catalysts

SEPARATION OF PROPANE FROM PROPANE/NITROGEN MIXTURES USING PDMS COMPOSITE MEMBRANES BY VAPOR PERMEATION

Highly Stable Propane Dehydrogenation on a Self‐supporting Single‐component Zn2SiO4 Catalyst

Promoting propane dehydrogenation over Zn/hollow porous silicalite-1 catalysts via modulating the electronic structures of Pt

N-Octyltrichlorosilane Modified SAPO-34/PDMS Mixed Matrix Membranes for Propane/Nitrogen Mixture Separation

Improved C–H Activation in Propane Dehydrogenation Using Zeolite-Stabilized Co–O Moieties

Pt-Sn-based catalyst's intensification using Al 2O 3-SAPO-34 as a support for propane dehydrogenation to propylene

Preparation of PDMS-PVDF composite flat-sheet membranes: Application in recovery of propane from propane-nitrogen mixture